Video: How to Replace CV Boot on 355 & 348

Discussion in 'Technical Q&A' started by spiderscott, May 17, 2019.

  1. spiderscott

    spiderscott Formula 3

    Feb 24, 2004
    Ratarossa HQ UK
    Full Name:
    Just finished replacing two of my CV boots on the 355. Its a common problem on these cars and is quite hard to see the boots and check them for splits, but well worth getting down there and taking a look.

    The Boot Kit itself is very cheap at £10 for 1x Rubber CV boot 2 x Metal Clip 1x Packet of Grease

    The process takes a good couple of hours, hopefully with the video it helps and speeds up the process.

    Qavion likes this.
  2. To remove this ad click here.

Share This Page