The OFFICIAL Parts wanted thread for 3x8/Mondials

I am looking for a cigar(ette) lighter body
The one that will accept a standard 12V plug
Mine are too small

 

What is the choice for protective film for the 328 fog lamps and where can I buy it?

 

I had a bunch of those Glasurit paint decals with that specific number. I just checked but they are all gone I did manage to dig up a batch of other decals. If anyone is interested just shoot me a PM and I'll give you the details. They are on a metallic foil like the originals...Forgot I had them!
Image Unavailable, Please Login

 

The main cam drive gear ... the one that goes on the crank.

I think I saw a lamp on ebay made from a 308 crank still had it on ... anyone buy it ?

cheers

 

I need the weird cigarette lighter for an '87 Mondial. Just the part that goes into the lighter socket.

Also, a blank door key.

 

HI, I search a vacuum reservoir for the heating/ac system of my mondial 3.2...It's like a coffee or coke can...
Image Unavailable, Please Login

 

Oh it's coffee can short for canister, It's one of those Italian brand coffee they use for Expresso
Good find

 

I have a 85 308qv and I need the radio plate that takes the place of the radio,I think all years will be the same size or fits all,must be black

 

Hi all,

new on this forum, I discovered this very interesting thread.

For my Euro 77 Vetroresina, I'm looking for a pair of rear turn lights .
The all orange ones (without central reverse light).
According to Bluemell, American specs did'nt have this type of rear lights, but...

Thank you in advance for any idea.

Paul

 

Hi,

I'm looking for a license plate frame for an '80 308 GTSi. Why they had to make this non-standard is one of the oddities about these cars I will never understand.

Thanks!

- Paul

 

Looking to fill the hole where the radio used to be! Thanks.

 

Jeff,

I found a replacement label (paint color decal) for my argento 308 on eBay.

I checked, and there wasn't much today, but maybe this fellow can help you out, if you send an e-mail telling him what you want:
http://cgi.ebay.com/Ferrari-Paint-Code-Sticker-ROSSO-CORSA-322-D-S_W0QQitemZ4650706324QQcmdZViewItemQQptZUK_CarsParts_Vehicles_CarParts_SM?hash=item4650706324&_trksid=p3286.m63.l1177

Hope this helps!

 

I can't remember what the Mondial antenna gasket looks like, but I supply this one for the Bosch AutoJet II & ball base antennas that the 308s & some other models used:

http://ferrarichat.com/forum/showthread.php?t=47375

See post #109 for pix, #101 for ordering info.

 

I need the exhaust pipe from the frunt header to the rear of the car for a 83qv (The one that bends under the right side cv) Thank you Bill Mason

 

I have the main cam drive, PM me with an offer




Wade

 

Heat shield for the thermal reactors (catalytic converters) from an 1982 Ferrari Mondial (don't know if it's the same as on other models).

Made of stainless steel and installs on the bottom of the car, covering the converters.

The hole in the middle is a wear-through from the converter's thermocouple (the hole acts as a drain for those ever present oil seepages).

Install "as-is" if yours is missing or use as a template to make another.

Just pay shipping.
Image Unavailable, Please Login
Image Unavailable, Please Login

 

That looks just like the one from the QV. (I had to have it made locally)

 

the one in the bottom is like the one I have on a 85qv,are these stock? I don't want to be dinged on the next show becuase of it

 

Those are the same one. Just a top and bottom pic. They are stock on the US Spec cars (the rest of the world uses something different) and are shown in the parts manual.

 

Need another? I'd hate to through it away... which is why I still have it.

Yes, it's an original item (for the Mondial anyway).

 

I'd put it back on man. Never know what you are going to run over down here.

 

The one I'm giving away came from the Mondial 8 I had years ago. Somehow I sold the car without it. My current 3.2 has a perforated screen instead and, from the looks of it, doesn't offer near as much protection.
Image Unavailable, Please Login

 

Two of the Banana vents, as I call them, at each end of a 308 dashboard.

I know there are two types:

-First one is for earlier 308's, screw in from top.

-Second for later 308's, have a stud and metal clip holdown.

I don't know the year transition was made, or if they are interchangeable. There is a part number for each type.

Anyone with any info or parts, I'd appreciate hearing about it.

 

I'm working on a mold for the newer stud mount type. Luckily I bought a couple of NOS ones about 5 years ago, so have mint condition mold patterns! I'm working on replacing the fragile plastic stud with a threaded metal one. Also inserting cross braces on the back of the louvers so they won't be so fragile & prone to warping. Watch for me to start a thread.


I've never seen one of the earlier screw mount types, so don't know what it would take to reproduce them. Anyone have pictures?

 

Verell, would that be the same as in the 328?