The OFFICIAL Parts wanted thread for 3x8/Mondials | FerrariChat

The OFFICIAL Parts wanted thread for 3x8/Mondials

Discussion in 'Mondial' started by Birdman, Oct 29, 2008.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. Birdman

    Birdman F1 Veteran

    Jun 20, 2003
    6,687
    North shore, MA
    Full Name:
    THE Birdman
    Due to popular demand, many here have decided that we ought to be organized in our quest for hard-to-find parts. Hence, the creation of this thread. If you are in need of a part for your 3x8 or Mondial, please post it here. Everyone else, check back occasionally! The goal is to allow us to swap parts without having to compete with each other on eBay, etc.

    This technique works pretty well....I have in the past gotten parts from several different fchatters when I was in need and this is usually the cheapest and most friendly way to get them.

    Please do not use this thread as a FOR SALE thread...we have classifieds for that.

    Ferrari nuts unite!

    Birdman
     
  2. Jeff Kennedy

    Jeff Kennedy F1 Veteran
    Owner Silver Subscribed

    Oct 16, 2007
    6,578
    Edwardsville, IL
    Full Name:
    Jeff Kennedy
    I would like:

    Replacement/repro color tag for the bottom of the engine lid

    Replacement rubber/plastic ring for the antenna base

    Jeff
     
  3. st@ven

    st@ven F1 Rookie

    Aug 4, 2008
    3,278
    Netherlands
    Full Name:
    Steven
    1 the cover of the battery compartment of my model 84 308 QV.
    2 find the long bold that holds the sparewheel for this same car.
    3 2 euro headlights for it ( in exchange i have some US seal beams)
     
  4. Birdman

    Birdman F1 Veteran

    Jun 20, 2003
    6,687
    North shore, MA
    Full Name:
    THE Birdman
  5. Iain

    Iain F1 Rookie

    Jan 21, 2005
    3,257
    UK
    Currently on the hunt for correct metric sized vaccum and breather hoses for my 328. A few are available from Maranello parts, but not many & those that are are fiersomely expensive. Also the two small braided hoses taht are the last links to & from the CIS metering head - NLA at the moment and many people probably ought to be replacing these. I am thinking of getting some made using the original fittings from the existing hoses if necessary.
     
  6. chrmer3

    chrmer3 Formula 3

    May 19, 2006
    1,719
    USSA
    Full Name:
    Chris
    #6 chrmer3, Oct 29, 2008
    Last edited: Oct 29, 2008
    Hi all,
    I cannot find the little square "frames" that go under the center console switches... My restoration is nearing completion & I cannot locate 2 of them, one blue & one yellow. Part numbers 61838700 & 61808100 respectively. Looked from Ricambi to rutlands to FerrariUK.... all NLA...

    This is for a 1986 328

    Tell me someone is refinishing these or someone has them laying around... I need them badly


    HELP!

    Chris
     
  7. snj5

    snj5 F1 World Champ

    Feb 22, 2003
    10,213
    San Antonio
    Full Name:
    Russ Turner
    The plastic hinge covers on Mondial front seats.
    I am just about to reproduce them in polished aluminum if I cannot find any.

    Every piece that is a problem on the Mondial is somehow plastic.
     
  8. JV's89

    JV's89 F1 Veteran
    Owner Rossa Subscribed

    Jul 18, 2006
    6,606
    Pittsburgh, PA
    Full Name:
    John
    328 fog lamps. As I understand it the lenses are now available but the housings are in very short supply.
     
  9. magnum

    magnum Formula Junior

    Feb 21, 2008
    877
    Barcelona, Spain
    Full Name:
    Antonio
    Hi guys.
    First of all, good idea Birdman!!!

    For a 1983 308 QV:
    I'm searching one original Cromodora rim 16" x 8", rear wheel, and the front hood strut pin.

    Yes, yes, I know that the rim is a hard part to find, but I post it anyway!

    I'm waiting...
     
  10. BillyD

    BillyD Formula 3
    Silver Subscribed

    Feb 28, 2004
    1,776
    Pacific Northwest
    Full Name:
    Bill
    As the title says I need/want firing order plate for 77 GTB air cleaner and the rubber grommets for the outside door handles, I use to see them advertised someplace.
     
  11. SonomaRik

    SonomaRik F1 Veteran
    Silver Subscribed

    Dec 15, 2006
    6,884
    Sonoma, CA
    the correct, beauty recessed washer with screw in CHROME, not the black ones like Ricambi sells, to be used for the screw downs on the door jam leather strips.

    Been looking at boating sites, which is almost close but the threads are off.
     
  12. Birdman

    Birdman F1 Veteran

    Jun 20, 2003
    6,687
    North shore, MA
    Full Name:
    THE Birdman
    I need one too. I'll bet Verell could make these easily.
     
  13. birddog

    birddog Formula Junior

    Jun 24, 2006
    415
    Illinois
    Full Name:
    Ed
    #13 birddog, Oct 29, 2008
    Last edited: Oct 29, 2008
    For a 1986 Mondial 3.2 Cab:

    A rear trunk lid support - original with black shaft and Ferrari screen printing on the cylinder.

    Original Blaupunkt Memphis SQR 04 head unit.

    Any documents/books relating to the car. (I only have the owners manual and pouch, and a sales brochure)
     
  14. snj5

    snj5 F1 World Champ

    Feb 22, 2003
    10,213
    San Antonio
    Full Name:
    Russ Turner
    There is a left and a right, I'd be up for buying two of each
     
  15. D.Mauro

    D.Mauro Formula 3

    Jun 18, 2006
    1,266
    Cumming/ Hlwd Fl
    Full Name:
    Dominick
    I need the two piece alum screws for the top frame, on the cab.
     
  16. GrigioGuy

    GrigioGuy Splenda Daddy
    Lifetime Rossa Owner

    Nov 26, 2001
    29,538
    E ' ' '/ F
    Full Name:
    Trailer Swift
    I want 328 AC vents that don't break. Metal, anyone?
     
  17. BwanaJoe

    BwanaJoe Formula 3

    Oct 23, 2006
    1,764
    Former Space Coast
    Full Name:
    Joe Burlein
    308 QV:

    1) Original spare tire tie down bolt
    2) NOS/good used rear amber lenses
    3) The little tubi replacement sticker for the air intake hose to the plenum (mine is fading)
    4) NOS/good used rear red side lens for US models
    5) Working antenna
     
  18. mforni

    mforni Karting

    Feb 27, 2008
    58
    Florida
    Full Name:
    Max Forni
    I need the AC vents that are on the dash board. Mine are bent and distorted from the heat.
     
  19. Birdman

    Birdman F1 Veteran

    Jun 20, 2003
    6,687
    North shore, MA
    Full Name:
    THE Birdman
    Joe,
    I got a very nice semi-auto antenna that closely matches the OEM one from Antenna World in Miami. 305-471-9507. I can't find it on their website. I got it in 2003. Part number S-41. Have the receipt right in front of me. Call them.

    Ricambi has a good price on the side marker lights last time I checked.

    Birdman
     
  20. BwanaJoe

    BwanaJoe Formula 3

    Oct 23, 2006
    1,764
    Former Space Coast
    Full Name:
    Joe Burlein
    Thank, I'll call those guys tomorrow. Hmm, hadn't checked on the side marker light after choking on the price of a new rear amber lens!
     
  21. PittsS2APilot

    PittsS2APilot Formula Junior

    Jun 29, 2007
    857
    Gulfport MS
    Full Name:
    Joe
    Hi All, I'd like a pair of 2v valve covers. With all of the "2v haters" out there you'd think someone would pay me to take them? :) Joe
     
  22. Mule

    Mule F1 Rookie
    Owner Rossa Subscribed

    Jun 25, 2003
    3,752
    Alaska
    Full Name:
    Mule
    #22 Mule, Oct 29, 2008
    Last edited: Oct 29, 2008
    328 fog lamps that are affordable. Short supply is an understatement. Saw one on Ebay for $4000 (for one!).

    I have a very old dirty intact right side one that I would volunteer for a prototype (or trade for a left side one).
     
  23. jonesdds

    jonesdds Formula 3

    Aug 31, 2006
    2,160
    SB,CA & Park City UT
    Full Name:
    Jeff
    Get some Cibies and H4 bulbs and do the relay upgrade for the lighting system described in some threads here. Here's a link for a good description/instructions for the set up. No affiliation by the way.

    www.danielsternlighting.com

    Someone correct me if wrong but this would equal anything if not be better than anything off a euro model car.

    Jeff
     
  24. jonesdds

    jonesdds Formula 3

    Aug 31, 2006
    2,160
    SB,CA & Park City UT
    Full Name:
    Jeff
    Verell was working on these I remember, I guess they've been put on the back burner, maybe someday. Forturnately, my are in good shape, minimal pitting and no cracks. Protected with some clear film.

    Jeff
     
  25. Kevinwi

    Kevinwi Karting

    Nov 21, 2006
    241
    I found my labels for my 85 308 at the following web site.
    http://www.italiancarparts.com/labels_plates/ferrari_labels_plates.htm
     

Share This Page