News

Testarossa & 512TR Door Seals are HERE!

Discussion in 'Boxers/TR/M' started by kerrywittig, Oct 8, 2017.

  1. kerrywittig

    kerrywittig Formula 3
    Rossa Subscribed BANNED

    Nov 10, 2005
    1,668
    Ithaca, New York
    Full Name:
    Kerry David Wittig
    I'm hoping by starting this thread that the many Testarossa and 512TR owners that have contacted me in the past two months asking for a set of door seals will contact me directly at 16Ltoy@msn.com

    I know that there were approximately 8 owners who wanted a set when the new shipment arrived.

    My computer lost all my saved contacts concerning parts wanted.....?!?!?

    The door seals are scheduled to be delivered to me on 10/15/2017
    .
    I will be able to ship for free to all within the US.

    Bad news though is......The seal material increased in cost, as well, the shipping increased from the manufacturer by 100%. To offset the increases I have had to increase the price by $20 USD.
    Now the total cost of seals for both doors, including shipping will be $245 USD.

    Also if you need a brake vaccum impeller YET...because eventually you will.
    I have a few in stock and each comes with all O-rings and FREE shipping worldwide for $595 USD.

    Again please contact me via my email 16Ltoy@msn.com

    Thanks

    Posting Me
     
  2. JIMBO

    JIMBO Formula 3
    Silver Subscribed

    Oct 31, 2003
    1,247
    Bradenton, Florida
    Full Name:
    Jim DeRespino
    I just replaced my driver side door seal yesterday with one of Kerry's repro seals. Perfect!
     
  3. tvu

    tvu Formula 3
    Silver Subscribed

    Apr 13, 2004
    1,225
    Southern California
    Full Name:
    Trieu
    Hi Jimbo,

    So how did you measure and glue the joint? Did you leave it at stock location with a 45 degree cut on each side? Or did you move the joint to some other place?
     
  4. vincenzo

    vincenzo F1 Rookie

    Nov 2, 2003
    2,761
    Kerry...
    How about posting some pics? Especially some close shots of the 90deg corners etc.
    Cheers,
    Vincenzo
     
  5. JIMBO

    JIMBO Formula 3
    Silver Subscribed

    Oct 31, 2003
    1,247
    Bradenton, Florida
    Full Name:
    Jim DeRespino
    Yes, the door seals were cut at 45 degrees and joined at the top rear corner of the door
     
  6. wda24729

    wda24729 Formula Junior

    Sep 22, 2014
    963
    Devon, UK
    Full Name:
    Graham
    Any clues with regards the glue you used and has it held up?
     
  7. kartboy1234

    kartboy1234 Formula Junior

    Nov 10, 2014
    431
    Palos Verdes, CA
    Full Name:
    Michael L
    Kerry, I emailed you for a set.
     
  8. Melvok

    Melvok F1 World Champ
    Silver Subscribed Owner

    Jul 25, 2008
    12,999
    Amersfoort, Holland.
    Full Name:
    Mel
    We call that 2-component glue .... 1 minute glue ...
     
  9. kartboy1234

    kartboy1234 Formula Junior

    Nov 10, 2014
    431
    Palos Verdes, CA
    Full Name:
    Michael L
    Kerry, I never emailed you back but I did receive my set of door seals. I'm going to do the install this weekend. Any tips or tricks to make it easier? Which glue should we use? Should the seals butt together at the top rear of the door opening?
    Thank you

    Sent from my ONEPLUS A3000 using Tapatalk
     
  10. Sleestak

    Sleestak Karting
    Silver Subscribed

    Jun 18, 2014
    66
    Coeur d'Alene, Idaho
    I'd like to know as well.

     

Share This Page