News

488 Radar Detector Mount (Escort Max360c)

Discussion in '458 Italia/488/F8' started by Soft, Feb 15, 2020.

  1. Soft

    Soft Rookie

    Aug 30, 2019
    5
    Full Name:
    Art
    I’m looking for a good permanent mount for my F488. I have a Blendmount on my Porsche and it’s been amazing but unfortunately they do not have a mount for the 488 with Homelink mirrors.

    It’s to hold the Escort Max 360c.

    What do you guys use? I want to avoid the suction cups and find a neat permanent solution.


    Sent from my iPhone using FerrariChat.com mobile app
     
  2. To remove this ad click here.

  3. scott61

    scott61 F1 Rookie

    Feb 11, 2004
    2,582
    North of Boston
    I just hardwired my 360Max and while I don't mind suction cup mirror mount sounds interesting. I don't have a homelink mirror so would that mount work for me?


    Image Unavailable, Please Login
     
    Caeruleus11 likes this.
  4. Gh21631

    Gh21631 F1 Veteran
    Silver Subscribed

    Feb 24, 2011
    5,581
    East
    What's it hardwired to for power?
     
  5. scott61

    scott61 F1 Rookie

    Feb 11, 2004
    2,582
    North of Boston
    The fuse panel on the driver side dashboard
     
    Gh21631 likes this.
  6. Soft

    Soft Rookie

    Aug 30, 2019
    5
    Full Name:
    Art
    I think it might work but you should double check with their customer support first. If indeed they support the “standard” rear mirror then you’re golden and you will love Blendmount.


    Sent from my iPhone using FerrariChat.com mobile app
     
    scott61 likes this.
  7. To remove this ad click here.

  8. Rory breaker

    Rory breaker Karting

    Apr 17, 2017
    228
    Have a Bel/Blinder setup, shop that installed it built a custom mount around the steering column for the display, and mounted the controller underneath the center console. Looks 100% OEM, highly recommended.
     
  9. RaceMX-M3

    RaceMX-M3 Formula Junior
    Rossa Subscribed Silver Subscribed Owner

    Dec 15, 2010
    507
    Frisco, TX
    Full Name:
    Scott
    Caeruleus11 and Thecadster like this.
  10. scott61

    scott61 F1 Rookie

    Feb 11, 2004
    2,582
    North of Boston
    Thanks, will look into it. Only thing I'm not sure of is it sitting lower blocking view? With the suction cup it's higher up and not that noticeable. Also these new suction mounts they use are much than the older ones and I never have any issues with it falling. Here is how it was on my huracan and in my Lotus


    Image Unavailable, Please Login


    Image Unavailable, Please Login
     
  11. Brambleworth

    Brambleworth Formula Junior

    Apr 4, 2011
    358
    NY
    Full Name:
    Ted
    Caeruleus11 and Thecadster like this.
  12. To remove this ad click here.

  13. FPFaeth

    FPFaeth Formula Junior

    Dec 3, 2009
    620
    NY
    Full Name:
    Frank Faeth
    Did you have AI Design in Tuckahoe, NY, install your system? I ask because they have a 3D printer mirror design just like that. It's a spectacular solution. (If not, who was your installer? Thanks.)
     
    Caeruleus11 likes this.
  14. Brambleworth

    Brambleworth Formula Junior

    Apr 4, 2011
    358
    NY
    Full Name:
    Ted
    Yes it is from AI Design
     
    Caeruleus11 likes this.
  15. FPFaeth

    FPFaeth Formula Junior

    Dec 3, 2009
    620
    NY
    Full Name:
    Frank Faeth
    Thank you.
     

Share This Page