Lamborghini Countach rear axle springs/coils | FerrariChat

Lamborghini Countach rear axle springs/coils

Discussion in 'Other Parts & Collectibles' started by Albert-LP, Nov 24, 2016.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. Albert-LP

    Albert-LP F1 Veteran
    Owner Rossa Subscribed

    Sep 1, 2010
    7,784
    around Modena, Italy
    Full Name:
    Alberto Mantovani
    #1 Albert-LP, Nov 24, 2016
    Last edited by a moderator: Sep 7, 2017
    I have at home what left of my Countach 5000S ELA12708

    Here you are all four excellent conditions OEM rear axle springs/coils, still perfectly working, no rust or damage. Changed due to a big error of my mechanic: then he discovered the problem was in the shock adsorbers, a small error that costed me just 2000 euro...

    They will be shipped in the same Lamborghini boxes where there were the new ones.

    They are good for every Countach

    600 euro + shipping (worldwide)

    PM or email to: [email protected]

    ciao
    Image Unavailable, Please Login
    Image Unavailable, Please Login
    Image Unavailable, Please Login
    Image Unavailable, Please Login
    Image Unavailable, Please Login
    Image Unavailable, Please Login
    Image Unavailable, Please Login
     
  2. randomlambo

    randomlambo Formula Junior

    Feb 3, 2013
    377
    RI & MA border
    Full Name:
    DT
    #2 randomlambo, Nov 25, 2016
    Alberto any idea where I can find a Lp400 or LP400S front hood?
     
  3. Albert-LP

    Albert-LP F1 Veteran
    Owner Rossa Subscribed

    Sep 1, 2010
    7,784
    around Modena, Italy
    Full Name:
    Alberto Mantovani
    #3 Albert-LP, Nov 25, 2016
    They are out of stock and in any case it won't fit your car as they are all different each other

    There are shops here that can redo it: They can redo everything, also a whole chassis. But they should know the measures of your car.

    Ciao
     
  4. randomlambo

    randomlambo Formula Junior

    Feb 3, 2013
    377
    RI & MA border
    Full Name:
    DT
    #4 randomlambo, Nov 25, 2016
    The outer skin for my 400S was cut for the US wing style front bumper. We reverted the changes and the bumper will be kept for display. I'd like to keep the cut hood rather than re-work it to patch up holes and repaint so this would involve getting a new one made/fitted.

    The issue that I'm seeing is that the back side of the hood is different depending on models 400 to 400s (not sure?) but definitely 400(s) to 5000. And I don't know which one I have -- I've asked for some pictures and will post mine in a thread under the Lambo subforum.

    What do you think it takes to get it made where you are and what dimensions do you need, I assume all sides dimensions (exact) on the outside? Do the shops know how to make the different back-side profiles and metal ridges/indentations?
     
  5. Albert-LP

    Albert-LP F1 Veteran
    Owner Rossa Subscribed

    Sep 1, 2010
    7,784
    around Modena, Italy
    Full Name:
    Alberto Mantovani
    #5 Albert-LP, Nov 25, 2016
    I think that this a sale ad and not an about your car discussion.

    Please post just something about my ad here.

    Thank you very much

    Ciao
     

Share This Page