For Sale - 18” HRE 540R 3pc Wheels & Tires 348 355 360 | FerrariChat
Buy

For Sale 18” HRE 540R 3pc Wheels & Tires 348 355 360

Discussion in 'Ferrari Parts & Collectibles' started by carbonsmith, Jun 3, 2019.

Tags:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. carbonsmith

    carbonsmith Formula Junior

    Jun 11, 2016
    316
    #1 carbonsmith, Jun 3, 2019
    Selling this set of four (4) 18” 3-piece HRE 540R’s, fully polished aluminum (not chrome), wrapped in 225/40 & 295/35 Michelin Pilot Sports.

    Wheels are in pristine condition. Absolutely no damage, zero curbing etc. Tires are balanced, with even wear. Lots of tread remaining, approx 7/32.

    Used for approx 500km on my 355, previously had them on a Testarossa. Would also fit 348, 360 and other 5x108 Ferrari / Jaguar applications. Selling these as I have too many wheels at the moment.

    Willing to ship at buyers expense. Asking $2500usd + shipping


    Image Unavailable, Please Login Image Unavailable, Please Login Image Unavailable, Please Login Image Unavailable, Please Login Image Unavailable, Please Login Image Unavailable, Please Login Image Unavailable, Please Login Image Unavailable, Please Login Image Unavailable, Please Login Image Unavailable, Please Login
     
  2. carbonsmith

    carbonsmith Formula Junior

    Jun 11, 2016
    316
    #2 carbonsmith, Jun 3, 2019
  3. chnco

    chnco Formula Junior

    Dec 20, 2014
    464
    Atlanta, GA
    Full Name:
    Allen C
    #3 chnco, Jun 5, 2019
    What’s the offset? Looks like 360 fitment on your 355, as they are sticking outside the fenders on the rear?
     
  4. carbonsmith

    carbonsmith Formula Junior

    Jun 11, 2016
    316
    #4 carbonsmith, Jun 5, 2019
    Couldn’t tell you the offsets, multi piece stuff wasn’t stamped.

    What I can say is they are aggressive on a 355. No they do not stick outside the fenders, they sit flush in the rear. I have no rubbing, very similar stance to where 360 18” OEM wheels sit in relation to the fender in comparison.

    These would work great on a 360.
     
  5. brookliner7

    brookliner7 Formula Junior
    Silver Subscribed

    May 5, 2018
    838
    San Antonio, TX
    Full Name:
    Hans
    #5 brookliner7, Jun 5, 2019
    dang...good deal here!
     
    carbonsmith likes this.
  6. chnco

    chnco Formula Junior

    Dec 20, 2014
    464
    Atlanta, GA
    Full Name:
    Allen C
    #6 chnco, Jun 5, 2019
    HREs have the inner and outer lip sizes and offsets etched on the rear of the face of each wheel they produce

    It’ll be a series of numbers/letters and I can help decipher from there. Hope that helps
     
    carbonsmith likes this.
  7. carbonsmith

    carbonsmith Formula Junior

    Jun 11, 2016
    316
    #7 carbonsmith, Jun 5, 2019
    Thanks :)

    Image Unavailable, Please Login
     
  8. chnco

    chnco Formula Junior

    Dec 20, 2014
    464
    Atlanta, GA
    Full Name:
    Allen C
    #8 chnco, Jun 5, 2019
    Front:
    Positive +28 offset, 6.5” inner barrel, 1.5” outer lip so this is a 18”x8” with +28 offset

    Rear:
    Positive +41 offset, 7.5” inner barrel, 2.5” outer lip so this is a 18”x10” +41

    The fronts are great for a 360 and rears will work as well, albeit it’s a bit more on the conservative side. My old HRE’s were 11.5” read with an even lower +38 offset
     
    brookliner7 likes this.
  9. carbonsmith

    carbonsmith Formula Junior

    Jun 11, 2016
    316
    #9 carbonsmith, Jun 17, 2019
    Chnco, Thanks for the info.

    Still available guys.
     
  10. benelliwang

    benelliwang Rookie

    Feb 15, 2017
    12
    Las Vegas
    #10 benelliwang, Jun 19, 2019
    Will these work for F430?
     
  11. carbonsmith

    carbonsmith Formula Junior

    Jun 11, 2016
    316
    #11 carbonsmith, Jun 19, 2019
    Last edited: Jun 19, 2019
    Yes, absolutely. I’ve had f430 scuderia 19” wheels on my 355. They are very close to the HRE.

    If putting these on a 430, Compared to the scud wheels, these HRE would poke out 3mm farther in the front, and also 3mm additional clearance from the inside strut area/inner barrel.

    The rears would sit in 3mm closer which would work fine, or you would ha e done room to run a 5 or 10mm spacer to poke them out a hair more aggressive than the 430 scud wheels

    Scud wheels are:
    19x8 (31.5) front & 19x10 (38)
     
  12. AndruL

    AndruL Karting

    Apr 4, 2018
    234
    Full Name:
    AndruL
    #12 AndruL, Jun 21, 2019
    Where are you located and do you know if these will fit a 3.2 Mondial?
     
  13. carbonsmith

    carbonsmith Formula Junior

    Jun 11, 2016
    316
    #13 carbonsmith, Jun 21, 2019
    East coast, Canada. Sorry I’m on sure in regards to the Mondial. Maybe someone else can chime in.
     
  14. notlaw

    notlaw Rookie

    Oct 30, 2019
    7
    Akron Ohio
    Full Name:
    Bailey Walton
    #14 notlaw, Nov 13, 2019
    Still available? I’m interested
     
    carbonsmith likes this.
  15. carbonsmith

    carbonsmith Formula Junior

    Jun 11, 2016
    316
    #15 carbonsmith, Feb 10, 2020
    Yes, feel free to message me with any inquiries.
     
  16. beachedferrari

    beachedferrari Karting
    Silver Subscribed

    Sep 12, 2020
    65
    Maryland
    Full Name:
    Mike Ferrari
    #16 beachedferrari, Dec 26, 2020
    Did these ever sell?
     
  17. carbonsmith

    carbonsmith Formula Junior

    Jun 11, 2016
    316
    #17 carbonsmith, Dec 28, 2020
    Sold to Mr. beachedferrari
     

Share This Page