Almost done with cleaning engine and F1 trans you can only do small sections at a time for best results. Next pulling all the old steel fasteners replace in Titanium should look a hell of allot better wend all done.
Another reason Titanium big plus aside from weight savings and great look .. Image Unavailable, Please Login Image Unavailable, Please Login Image Unavailable, Please Login Image Unavailable, Please Login
Image Unavailable, Please Login Image Unavailable, Please Login Image Unavailable, Please Login Image Unavailable, Please Login Image Unavailable, Please Login
Cost 400.00 setting up charge biggest cost then maybe each bolt 55.00 Might as well make a few extra ones
Image Unavailable, Please Login Image Unavailable, Please Login Image Unavailable, Please Login Image Unavailable, Please Login
looks to me like a standard size bolt m16 1.5 120mm should be a easy find in titanium. Maybe have to change to a m16 2.0 120mm. Are u looking for Grade 5?
Your going to need some tie down straps to keep that thing from blowing away if you get it much lighter. Sent from my iPhone using FerrariChat.com mobile app
Yes Image Unavailable, Please Login Image Unavailable, Please Login Image Unavailable, Please Login Image Unavailable, Please Login Image Unavailable, Please Login
Where would you find that bolt ? maybe better deal than what my guy wants to charge ?? Any info would be great !
I found some when I was searching. But I just got my phone replaced. I think the one I found was m16 2.0 by 120mm grade 5 the big disk is easy to make I have a small lathe I make small parts all the time.
Going to make a few more passes with NAPA Aluminum bright you can see the places missed, hard to tell wend every thing is still wet after drying you see the dirty parts missed. For best result use a garden sprayer use distilled water and rinse and rinse and keep off steal metal parts.