Hello, My name is Carlos Salaff and I'm new to FerrariChat. I'm starting a build thread to share a project that's very special to me. Hopefully you will enjoy it, too. My background is in Automotive Design. I worked at Mazda's Southern California design studio for 10 years and played a key role in the exterior design of the Mazda Ryuga, Nagare and Furai concept cars as well as production vehicles like the CX-7, Mazda 3 and new MX-5. In 2012, I left Mazda and began a new chapter: the formation of my own car company and design of my first car. I have always loved 1960s through 80s-era racing and sports cars. Many of these cars were designed by small teams, crafted by hand, and functioned as raw, mechanical beasts. I am committed to carry on these values with my company and products. My first prototype (named project Caden, after my son) has recently begun the fabrication phase. This is a momentous occasion for me. For the past three years I have been sketching, creating physical models, and working in the computer to develop and finalize my design. This has been primarily a solitary experience, until recently when I brought on several experienced craftsmen to help bring my dream from the digital world into reality. Ohio-based Pete's Custom Coachbuilding is hand-forming the aluminum body panels, just like the early days of Pininfarina and Bertone. Metcalf Racing, a Texas-based shop specializing in the restoration and racing of vintage Formula, Indy, and prototype cars, is designing the pushrod suspension and is currently working on fabricating the aluminum monocoque chassis. I have much more to share with you all, but for now I wanted to introduce myself and the project. I will keep this thread active as things progress. Thanks for your interest!
Hi SV, Great question, thanks for asking! Early in the project, I considered a carbon fiber body and tub(like most every performance car of today) but decided it would not help support the experience I'm after. This car will be largely carbon-fiber free because I believe metals have a timeless quality that is special, and in part explains why vintage cars like the Ferrari 330P4 and Jaguar E-type have lasting appeal compared to today's plastic-rich products. The tub will be a riveted aluminum monocoque. The rear subframe and wishbones will be of polished stainless. The bodywork will hand-beaten out of aluminum and left naked. These materials will be left on display and not covered up, because I want to celebrate their natural beauty.
I am starting body fabrication with the center section of the car--no fenders yet. I created a buck by taking sections from my digital model and having them laser cut out of MDF. The pieces lock together like a puzzle, so no glueing or fasteners needed. Metal work at Pete's Custom Coachbuilding has started with the nose section. Image Unavailable, Please Login Image Unavailable, Please Login Image Unavailable, Please Login Image Unavailable, Please Login
Make sure you separate the SS subframes from the alum tub including all fasteners. dissimilar metal corrosion is a ***** as anyone with a Lola has come to learn. Best of Luck
Galvanic corrosion... if the parts are coated he will be fine. Good point for Carlos to keep in mind. Great project, looking forward to following the entire process! Thanks for sharing
Thank you Keith, Mario, Jim, and Alexander for your interest and comments! I'll be sure to keep you posted on the build. Jim, thanks for sharing your experience with galvanic corrosion. I will be sure to keep it in mind. BTW I'm a big fan of yours and of the cars you have brought to life!
Hi guys, I thought I'd share my process for designing the station bucks, over which metal shapers are handcrafting the aluminum. From my digital computer model, I first extract sections--like slicing a loaf of bread. From there, I develop the sections so that they will assemble like an old-school wooden dinosaur puzzle. Lastly, the files are sent to be laser cut in 1/2" MDF and the pieces are assembled. In the photos, you can see how I followed these steps for the center portion of the body. I am finishing the files for the fender bucks, which I'll send out soon to be laser cut. The 2nd photo shows a rear tipped-up view of the digital model, with the fender buck curves surrounding the central "fuselage". I love that the process is a marriage of traditional and modern ways of working. Image Unavailable, Please Login Image Unavailable, Please Login
Hi, Carlos. Fantastic project. Looking forward to see what unravels. Especially interested in your thoughts about blending traditional and modern techniques. Helge
Haha yes I have not shown the car with fender surfaces yet, and the central "fuselage" hanging all by itself really does looks like a speedboat! Here's a screen shot showing my design with fender surfaces included. Two big inspirations for me are Mansell's Ferrari 640 and Stewart's Tyrrell 003. Both have boat-like central "fuselage" forms that dive in and around the wheels, with contrasting, straight wing elements. All bred for function and racing regulations, but gorgeous too. The interplay of front wing and fuselage on the Tyrrell is just delicious to me Image Unavailable, Please Login Image Unavailable, Please Login Image Unavailable, Please Login
Fascinating! Is the idea of interlocking forms yours, or is it common practice? Very smart! Metal, done right, is indeed beautiful, but I am not so sure about the bare metal...that's going to take a lot of upkeep. I hope it comes out true to your dreams. Can't wait to read about your progress. Please provide regular updates.
Carlos, great project! I wish I lived near you. I would work for you for free just to learn this fine and dying art of hand fabrication. Good luck!
Hi Jim, Yes--I ran some CFD tests on early models, and will be doing more to efficiently manage air through the car. For those who are wondering--CFD is short for "Computational Fluid Dynamics". It's computer software that allows you to virtually test models for aerodynamic properties.
Thanks for your interest and comments Zack! I'm not sure if others are using the exact process as I to design their bucks, but I wouldn't be surprised. I do know for sure that other metal shaping studios have been successfully integrating the digital workflow into their process and using similar ideas. You raise a valid point re: metal upkeep. We'll try various ideas on test panels and see what we come up with. The bare metal look is so important to me, that I'm willing to put in the extra effort to find solutions. I'm certainly open to suggestions.
Thanks Dominic! I have designed the car digitally, and am providing the wooden "buck" patterns for skilled craftsmen to form the metal to. I am as fascinated as you by the traditional art of hand fabrication. I believe that the touch of an artist's hand on metal somehow can imbue a car with soulfulness. The fine folks at Pete's Custom Coachbuilding are doing the metal shaping, so Pete is the one to call regarding an unpaid internship
Metal shaping is in progress on the center portion of the car. It's hard to not get goosebumps after seeing it living on my computer screen for so long. Image Unavailable, Please Login Image Unavailable, Please Login