Maranello 550,fastners for door scuff plates/sills | FerrariChat

Maranello 550,fastners for door scuff plates/sills

Discussion in 'Australia' started by jmw550, Oct 7, 2017.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. jmw550

    jmw550 Rookie

    Nov 26, 2016
    5
    #1 jmw550, Oct 7, 2017
    I have just noticed that the driver's side scuff plate/sill has come adrift and seems to be hanging on by one fastner...!!! I am not game to lift it off yet to see how it hangs together without further information. Does anyone know what the fastening system is and are the fastners available,if so where from..? my first post so be gentle..!!!! maranello 550,1999 16,000 km from new,one owner, me....
     
  2. Horse

    Horse Three Time F1 World Champ
    Owner Silver Subscribed

    Dec 1, 2005
    34,843
    Brisvegas
    Full Name:
    Jon
    #2 Horse, Oct 7, 2017
    Less than 1,000 k's a year?

    You're worse than me!

    One of our 575 owners should be able to help, otherwise ask in the 550/575 area.
     
  3. Aircon

    Aircon Ten Time F1 World Champ
    BANNED

    Jun 23, 2003
    100,524
    Melbourne, Australia
    Full Name:
    Peter
    #3 Aircon, Oct 7, 2017
    Was that being gentle?
     
  4. IanB

    IanB F1 World Champ
    Owner

    Jun 15, 2006
    15,654
    Sydney
    #4 IanB, Oct 7, 2017
    Plastic pins molded into the reverse side, not replaceable clips. You could try ordering a new sill plate from Ferrari, or put a dob of clear silicone under the end that's adrift to glue it back down.
     
  5. jmw550

    jmw550 Rookie

    Nov 26, 2016
    5
    #5 jmw550, Oct 8, 2017
     
  6. jmw550

    jmw550 Rookie

    Nov 26, 2016
    5
    #6 jmw550, Oct 8, 2017
    you were too kind...!!! just did 400K today...
     
  7. jmw550

    jmw550 Rookie

    Nov 26, 2016
    5
    #7 jmw550, Oct 8, 2017
     
  8. jmw550

    jmw550 Rookie

    Nov 26, 2016
    5
    #8 jmw550, Oct 8, 2017
    Thank you Ian. I will explore the gold plated option first and then decide. I like the "dob of silicon" solution because it is only a cosmetic trim. does anyone know the part number..? before I go to my dealer, I am due for it's annual service and fluids change.
     
  9. greg246

    greg246 Two Time F1 World Champ
    Owner Silver Subscribed

    Jun 2, 2004
    25,707
    Sydney,Australia
    Full Name:
    Greg
    #9 greg246, Oct 8, 2017
    Have a look at the Eurospares website, easy to find the part and part number. Is this what you need?

    https://www.eurospares.co.uk/parts/ferrari/550-maranello/bodywork-lighting/outside-finishings-19909/64557500
     
  10. F-Serge

    F-Serge Formula 3

    Aug 3, 2004
    1,921
    UAE
    Full Name:
    Serge
    #10 F-Serge, Oct 8, 2017
    if Ferrari can still supply it then buy a new one from the dealer, it's only going to be $70-80.
     

Share This Page