Your take on MAF settings | FerrariChat

Your take on MAF settings

Discussion in '348/355' started by Lars_vet, Sep 19, 2007.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. Lars_vet

    Lars_vet Formula Junior

    Feb 25, 2007
    603
    On the open road
    Full Name:
    Lars
    #1 Lars_vet, Sep 19, 2007
    Last edited by a moderator: Sep 7, 2017
    1. Question. Do I need to change my MAF Ohm setting over stock, when I have added Capristo exhaust, Test pipes, and KN filter? What Ohns should I run then?

    2. What condition, lean or rich does these plugs tell you..?
    Dont mind the missing center electrode on #8 plug, does that fail tell anyting about lean/rich?
    Image Unavailable, Please Login
     
  2. ernie

    ernie Two Time F1 World Champ
    Lifetime Rossa Owner

    Nov 19, 2001
    22,574
    The Brickyard
    Full Name:
    The Bad Guy
    Where is the tip of #8??????? I would have a look inside the cylinder to see if it is in there some place.
     
  3. Lars_vet

    Lars_vet Formula Junior

    Feb 25, 2007
    603
    On the open road
    Full Name:
    Lars
    Old story...

    Right now im concerned about my lean/rich situation...and if my mods requires a change i MAF ohms...
     

Share This Page