360 - Wheel well material? | FerrariChat

360 Wheel well material?

Discussion in '360/430' started by 550nitis, Feb 15, 2020.

Tags:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. 550nitis

    550nitis Formula Junior

    Feb 3, 2016
    715
    Houston
  2. Ghostdiver

    Ghostdiver Formula 3
    Silver Subscribed

    Mar 18, 2005
    1,326
    Southeast Texas
    Full Name:
    Wally Hollar
    Had an unfortunate incident with what I thought was a small rock...turns out it was a chunk of concrete curbing and it wasn't that small. Damaged my under tray which I think is the same material. Cleaned up the backside, laid some fiberglass to repair it, painted with GM specific semi-flat/satin paint
     
    EastMemphis likes this.
  3. 97 Spider

    97 Spider Formula 3
    Rossa Subscribed

    Dec 15, 2012
    2,241
    Texas
    Full Name:
    Brian
    They are fiberglass with a black mat gel coat. I believe I have 3 out of 4 wheel liners available in good shape for cheap if you can’t fix it and it’s one I have.
     
    Mimmo Blue likes this.
  4. 550nitis

    550nitis Formula Junior

    Feb 3, 2016
    715
    Houston
    Sending pm
     
  5. Skidkid

    Skidkid F1 Veteran
    Owner Rossa Subscribed

    Aug 25, 2005
    8,682
    Campbell, CA
    Full Name:
    John Zornes
    I thought they were a thermoplastic but, the photo sure looks like fiberglass. Unless you are concourse, you should cut out the slats and replace with stainless screen.
     

Share This Page