What's involved to replace/install the gear lever boot? | FerrariChat

What's involved to replace/install the gear lever boot?

Discussion in 'Mondial' started by ATLdoghouse, Sep 17, 2017.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. ATLdoghouse

    ATLdoghouse Formula Junior
    Silver Subscribed

    Sep 3, 2016
    368
    Atlanta
    Full Name:
    Cody L
    So a friend was following me and commented that my reverse light would seem to come on for a while then go off as we were driving. As it turns out my gear level rubber boot has torn a bit around the top edges and when I shift into 2nd or 4th it will deform enough to push the reverse light switch and stay on until I shift out of those gears.

    So in looking at it after taking off the shift gate plate it seems it's not as obvious how one would replace it.

    Anyone know or has done this before ?

    Part reference: https://www.ricambiamerica.com/car-diagrams/ferrari/v6-v8/mondial-group/mondial-t/outside-gearbox-controls/145498-boot.html
     

Share This Page