testarossa seat belt removal | FerrariChat

testarossa seat belt removal

Discussion in 'Boxers/TR/M' started by johnvwatts, Jun 5, 2020.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. johnvwatts

    johnvwatts Formula Junior

    Jul 7, 2007
    522
    England
    Full Name:
    John v watts
    #1 johnvwatts, Jun 5, 2020
    I have some fraying on the inertia belts where they enter the holder. Have found a company to insert new webbing which is good. The question is how do I get the retractor out? It is hidden behind a panel which does not want to come off easily. Looks like there is a formula for removal of the various trim sections. Has anyone done this before? Thanks John.
     
  2. 302Tim

    302Tim Formula 3

    Jul 2, 2011
    1,182
    Northern California
    Full Name:
    Tim
    #2 302Tim, Jun 5, 2020
    John,there is definitely a sequence. The attached was written for a US car but yours should be very similar if not the same (not sure about the upper trim panel). Once the trim is removed it will be obvious how to remove the belt & retractor unit.
     

    Attached Files:

    raysur likes this.
  3. johnvwatts

    johnvwatts Formula Junior

    Jul 7, 2007
    522
    England
    Full Name:
    John v watts
    #3 johnvwatts, Jun 5, 2020
    Many thanks indeed.
     

Share This Page