Testarossa Cross Reference Thread

DAC 6093 coils are for the Jaguar XJS 1988-1990 with Marelli ignition system. You can find those on the internet using this identifier: W0133-1614576.
Here is the link:
http://www.autopartsdeal.com/catalog...+Ignition+Coil

 

I just started looking at my new testarossa. I expect to change the oil myself as a starting small task, but I can't find a reasonable oil filter. The Ferrari ones are in the $50+ range (which puts the profit inthe $40+ range.. My 246Gt used a Fram with a check valve in it. Is there a cross reference for the Testarossa one?

steve

 

No. I wish there was.......

 

Yoiks,

Can it be that difficult to call K&N etc and have one commissioned. We should have enough owners in the group. A case of 12 each and they have a start on a production run. Is there anything that anyone knows about the filter which precludes copying it?

steve

 

Could use one if still available PM me

 

Why not post this question as its own thread. We should try to keep this cross reference thread as tidy as possible with cross reference material only..

R

 

Hello,
This may be a useful link for different bearings for Testarossa wheels and differentials. Use the part number to serch for the part.

http://www.car-stuff.com/store/parts...word=fuel_pump

TIMKEN AXLE BEARING RACE
Part#: M802011 $7.75
Fits: Rear, Driver Side.

TIMKEN DIFFERENTIAL BEARING RACE
Part#: 368A $21.59
Fits: Rear, Driver Side.

TIMKEN DIFFERENTIAL BEARING RACE
Part#: 28580 $35.25
Fits: Rear, Passenger Side.

TIMKEN PINION BEARING RACE
Location: Rear, Inner $15.84
Part#: M802048

TIMKEN PINION BEARING RACE
Location: Rear, Outer $23.79
Part#: 28158

TIMKEN PINION BEARING CUP
Location: Rear, Outer $13.06
Part#: 28300

TIMKEN BEARING CUP
Fits: Rear Axle Bearing
Location: Rear $8.82
Part#: 362A 

Manufacturer: General Motors
Mfg Part Number: 09439958
Brand: ACDelco
Catalog Description: BEARING ASM,FRT WHL OTR
Part Number: S299
Price:about $20-22
Fits :
• 1990 FERRARI 348 TB V8-3405cc 3.4L F/I Vin F
• 1990 FERRARI 348 TS V8-3405cc 3.4L F/I Vin F
• 1990 FERRARI F40 V8-2936cc 2.9L F/I Vin M
• 1990 FERRARI MONDIAL T V8-3405cc 3.4L F/I Vin F (CABRIOLET)
• 1990 FERRARI TESTAROSSA H12-4943cc 4.9L F/I Vin S

 

I remember a few months ago someone posted looking for bushings, I stumbled across these today.
http://www.jegs.com/i/Energy+Suspension/355/13-3101G/10002/-1

 

While doing some research on alternatore I sumbled on this:

http://shop.ferrariparts4less.com/auto_parts/testarossa-engine_electrical-f4000_133645bos.html

Can anyone confirm or deny that this alternator is the right part#? wow, 120 amp, rem Bosch alt for little over $230 ?!?!?!?!

Just in case part# F4000-133645/BOS

 

--------------------------------------------------------------------------------

These switches are no longer available from the factory. Used switches tend to run several hundred dollars and still break. The OEM phenolic sliders tend to crack and break. Our new sliders are durable aircraft grade 6061 aluminum and are cut using a water-jet. The switch housing is drilled and tapped so the switch can be reassembled with all stainless steel hardware.

Check a demonstration on this repair at:

http://www.youtube.com/watch?v=-duZwoRtvOk

Call P4 by Norwood and ask for Tim for more info on this A/C switch repair at #214-317-2762
Image Unavailable, Please Login

 

http://www.familycar.com/store/item/Ferrari_Testarossa_Bosch_Starter_1985_1991_W0133-1842921.html
http://www.familycar.com/store/?Ntt=ferrari+starter&oes=true
STABILUS HOOD LIFT STRUT -- OEM Direct Fit, Replacement Hood Lift Support http://www.familycar.com/store/item/Ferrari_Testarossa_Stabilus_Lift-Support_1985_1991_S2SG437003.html
STABILUS GAS-CHARGED TRUNK LIFT SUPPORT http://www.familycar.com/store/item/Ferrari_Testarossa_Stabilus_Lift-Support_1985_1991_S2SG337002.html
• Brand: Anco
• Part: Wiper Blade
• Part Number: ANC20UB http://www.familycar.com/store/item/Ferrari_Testarossa_Anco_Wiper-Blade_1985_1988_ANC20UB.html

• Brand: Bosch
• Part: Fuel Pump
• Part Number: W0133-1755100 http://www.familycar.com/store/item/Ferrari_Testarossa_Bosch_Fuel-Pump_1987_1991_W0133-1755100.html

 

No cross belt for the 86 TR alt V belt??? Part 127132

 

I found an odd entry in my 86 TR manual.....NAPA oil filter #1774 ....I wonder if this is correct to use? Cost $13.80 !!!!

Anyone please confirm or deny?

 

Gets a definite "maybe OK" IMO -- the thread size (1-12) and the gasket ID and OD are OK. I didn't record the physical ID and OD of the UFI 2319202 filter case (but if anything the NAPA looks shorter in the photos). The only things missing in the specs that I'd like to know are the maximum recommended working pressure and the minimum burst pressure. I'd also like to compare the total area of the circular inlet holes just to make sure it's in the same ballpark as the UFI.

http://www.napaonline.com/Search/Detail.aspx?R=FIL1774_0006473344#

For that price, maybe I'll buy 2 and dissect one

 

I was thinking the same thing, but I dont have an old OEM to compare it to. I will leave that to you if ya volunteer my friend? And Im sure you will update your findings ASAP so we can start saving some $$$$$ ?????

 

AC Belt V-grove NAPA #7312 perfect size, depth and thickness

 

Disappointing news on the NAPA 1774 oil filter (which fits a 400 in^3 Ford diesel in a New Holland Tractor per NAPA) for a TR. Although all of the mounting features are OK, there are two differences that make it too big a risk to use IMO without more testing/information:

1. Inlet area on the NAPA 1774 is only ~73% the size of the UFI 2319202. The NAPA has six .312" inlet holes while the UFI has eight 8mm inlet holes, and

2. The pressure specs seem marginal. NAPA supplied a maximum recommended working pressure spec of 100 psi and a minimum burst pressure spec of 430 psi. Don't have the values for the UFI, but, for reference, the Baldwin B253 has a maximum recommended working pressure spec of 300 psi and a minimum burst pressure spec of 600 psi. I have a suspicion that my TR's oil pressure gauge reads a little high, but I don't like the lack of margin and the UFI definitely feels "huskier".

 

Darn it

I tried..... thank you for the update and research

 

All,

I made a spreadsheet and populating it with all the info that members have posted. I myself always have trouble finding an inportant part number post when I need it, so here goes.

I hope that this gets posted and can be a sticky on this forum. For the mods, if you can make this available for all to be able to update it online I think it could be a good reference. Maybe page 1

I hope this uploads and works.

Cheers

Mouser57
Image Unavailable, Please Login

 

thats some good stuff!!!!!!!!!!!!!!!!!!!!!!!!!

thank you

 

Great Job.. Thank you..

R

 

Fantastic spreadsheet, thanks!!

 

Now if we can keep it up as a live document to add things to instead of always uploading time after time. It would be nice to have it viewable online too!!!!

 

wit another 25 part numbers, more to follow
Image Unavailable, Please Login

 

I had a bad ac compressor. I could find no cross reference We found a direct replacement.

I took the original to a napa warehouse and started looking thru boxes.

FRIGETTE # 204-877 $430 If you go to Frigette web site they do not show this number for a TR(they show no match). All I know is that upon physical exam, it fit fine. Mine is 88.5 TR

Got a dryer from GT Car parts $160 shipped.