Testarossa Cross Reference Thread

DISCLAIMER: **This only applies to US, SA, and CH88 cars. I purchased 2 new charcoal canisters, PN 114675 from Maranello to replace my originals. The replacements are from a different vendor, exact in form/fit/function but different cosmetically. I'm sure they are fine replacements and for the judge that can get his eyes down there they will be acceptable as they are the currently supplied parts from Ferrari. I later stumbled on an eBay auction for NOS Fiat canisters, PN 4442162. The photos and description looked identical to my originals so I picked them up.

The new Ferrari canisters are made by DAYCO, with different markings and a light pebble-finish. The NOS Fiat canisters are made by the same OEM as my original Ferrari canisters, an Italian company shown as A (diamond) R. These are exact replacements, with a smooth finish. The new Ferrari canisters were ~$37.00 ea., and the NOS Fiat were $30.00 ea., so not much of a difference price-wise.
Image Unavailable, Please Login

 

There are replica distributor caps made now that are of a very high quality. This thread details the tests run and positive personal experiences with the replicas which cost $130 per cap.

http://www.ferrarichat.com/forum/boxers-tr-m/270427-lookin-distributor-cap-s.html

Not exactly a cross-reference, but a huge cost savings over new. $1200 per cap from the F pimp.

 

I sourced suitable axle sealing rings through a local Bearing supplier made by SKF
they are CR45x60x8CRW1 rotational. The application is the same as the originals and only $20 each
Image Unavailable, Please Login
Image Unavailable, Please Login
Image Unavailable, Please Login

 

Good morning. i need help to find new tyres for my 91 testarossa (european version). my back tyres 255 50 VR 16 is not possible to find it. do you know alternative tyres without wheels change. regards and sorry for my "no english"

 

Kumho and Hankook both make this size tyre.

 

Thankyou very much. i try to find this brands in my dealer. regards.

 

Cold start valve Banjo Bolt. Online $25 to $45 at Ferrari.

$3.80 at your local VW dealer. Its is from a 1988 VW fox.

 

Beautiful Ferrari

 

Does anyone know where I can get a replacement thermostat for my 88 TR
Thanks,
Bob

 

those thermostats you may get in every radiator repair shop.
take one old with you because of the dimensions and show them.
but may be the opening temperature would be a little different.

and don´t tell them that this is for a F, otherwise they just will raise the price 3 times and more

 

If you break your clutch hose fitting on the top of the clutch master cylinder (the hose from the brake master reservoir connects to the clutch master) the 90 degree plastic fitting can be replaced by BMW part number 21-52-1-151-697. The original is white and a 90 degree bend while the BMW is black and an 80 degree bend. Still, as the Ferrari item is not sold separately at $7.99 it is cheaper than a new clutch master.

 

VERY GOOD news to some of us ... thanx !

 

This system is different from Testarossa; a therad with information can be found here:

http://www.ferrarichat.com/forum/boxers-tr-m/440212-512tr-left-window-vanished.html#post142981165

 

TR A/C compressor belt- Gates 11M800. Look for it online, should be available for around $25.

 

Searching for "0 331 303 033" on the O'Reilly website says that BWD S5402 is also a match. I called O'Reilly and they said the BWD unit has actually been replaced by Import Direct Ignition part #31-0209.

http://www.oreillyauto.com/site/c/detail/IDI0/310209/01931.oap?year=1980&make=BMW&model=733i&vi=1012633&ck=Search_01931_1012633_-1&pt=01931&ppt=C0330

It's more expensive than the WAI units at $58.99... but they have a price-match policy if you can find it somewhere cheaper, and the best part is that there is a lifetime warranty on the part. So when (not if) it eventually fails again because it's still getting heat-soaked due to its location... keep your receipt and get unlimited replacements!

 

And it's a good thing I checked before I went shopping.

The starter solenoid in my 92 512TR has "0 331 303 032" on it! So I'm guessing they were using up old stock before switching over to the 033. Another reminder that it's best to get eyes on first. These are small production, hand-built cars, folks.

 

Is there maybe a new link to thes lights please ?

 

I posted about this a while back but decided to go through a full hot summer before putting it here in the cross reference thread.

I bought for my Testarossa a starter solenoid ZM-576 instead of a WAI 66-9131, and it is a perfect fit. i've never had another hot starter issue ever since I installed it. ZM solenoids seem to be a lot easier to find, at least here in Europe. The WAI 66-9131 solenoid is impossible to find on the web.

So here is a new cross reference for the problematic TR solenoid!
Image Unavailable, Please Login
Image Unavailable, Please Login
Image Unavailable, Please Login
Image Unavailable, Please Login

 

Chabch that part is this? (Ref 0280160111)

Image Unavailable, Please Login

 

No its NOT that part.

Phil

 

You should fill up your profile and introduce yourself, it's nice to know who we're helping...

this is where it is:
Image Unavailable, Please Login

 

Late 1990+ TR Clutch Throw Out bearing. Fpimp $750, Maranello Classics $477.

Below is a cut and paste from a thread discussing said bearing.

http://i265.photobucket.com/albums/i...ps5791ef3c.jpg

If you peel of the Ferrari label, it says Maranello Classics. They list the bearing on their web site for $477. Nice mark up Ferrari......A**holes. As least we know where to get the bearing at the best price. Now we need to find out who makes the bearing for Maranello Classics and go directly to the source.

 

Ferrari OEM carcover for 360 and 430 fits perfect on 512 TR.
If you buy 430 cover you have 430 logo printed on left mirror "ear".
I have the 360 cover on mine below.
Image Unavailable, Please Login

 

I just recieved 12 x 0 437 502 047 brass fuel injectors from this Ebay store

germanautosupply on eBay. USD$25 each for 12 - 3days FEDEX from west coast US to Oz. Great service and communication from this guy
Image Unavailable, Please Login

 

I replaced by AC compressor. A direct replacement is
Murrey 58046 $280 from O"Reilly
If you plan to switch to 134A, then the fittings are
Murrey 14720 and 14718.

all fit perfectly

Burnell Curtis