Rubber belt residue | FerrariChat

Rubber belt residue

Discussion in '456/550/575' started by dersark_painclinic, Jan 18, 2020.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. dersark_painclinic

    dersark_painclinic Formula Junior

    Mar 8, 2005
    981
    Glendale, CA
    Full Name:
    Lazik Der Sarkissian
    #1 dersark_painclinic, Jan 18, 2020
  2. Laserguru

    Laserguru Formula 3
    Owner Silver Subscribed

    Aug 7, 2016
    1,255
    New Hampshire
    Full Name:
    Eric
    #2 Laserguru, Jan 18, 2020
    0000 Steel Wool, but protect the rest of the part from small fibers that come off. Won't hurt the surface you're cleaning as bad as sandpaper (even 600 grit). But if that is a bearing, really tape it off and protect it.
     
  3. dersark_painclinic

    dersark_painclinic Formula Junior

    Mar 8, 2005
    981
    Glendale, CA
    Full Name:
    Lazik Der Sarkissian
    #3 dersark_painclinic, Jan 18, 2020
    Thanks
     
  4. tazandjan

    tazandjan Three Time F1 World Champ
    Lifetime Rossa Owner

    Jul 19, 2008
    38,054
    Clarksville, Tennessee
    Full Name:
    Terry H Phillips
    #4 tazandjan, Jan 18, 2020
    Did you try 3M adhesive remover?
     
  5. dersark_painclinic

    dersark_painclinic Formula Junior

    Mar 8, 2005
    981
    Glendale, CA
    Full Name:
    Lazik Der Sarkissian
    #5 dersark_painclinic, Jan 18, 2020
    I even try tar and sap remover but did not have adhesive remover to try, will try tomorrow
    Thanks for help
     

Share This Page