Recommendations for PPI for 458 in Bellevue Washington? | FerrariChat
Buy

Recommendations for PPI for 458 in Bellevue Washington?

Discussion in 'Northwest' started by cudaman, Jul 8, 2024.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. cudaman

    cudaman Rookie

    May 7, 2021
    39
    Full Name:
    David Lehmann
    #1 cudaman, Jul 8, 2024
    Hoping someone can direct me to their "go to" person to perform a PPI on a 458 in the Bellevue Washington area. Thanks in advance for your insight!
     
  2. GaryReed

    GaryReed F1 Rookie

    Feb 9, 2002
    3,127
    Seattle
    Full Name:
    Gary
    #2 GaryReed, Jul 8, 2024
    Last edited: Jul 8, 2024
    Ferrari of Seattle service center is the first that comes to mind. Redmond is next to Bellevue.
    7410 185th Ave NE, Redmond, WA 98052 206-329-7070

    For an independent shop in that area which has a computer that can work on a 458, there's Group 2 Motorsport in Woodinville, WA. (206) 378-0900
    14410 NE North Woodinville Way, Woodinville, WA 92058
     
  3. cudaman

    cudaman Rookie

    May 7, 2021
    39
    Full Name:
    David Lehmann
    #3 cudaman, Jul 8, 2024
    Thanks Gary. I had contacted Ferrari of Seattle, but was hoping there is am independent that would be a good bet. I will see what Group2 has to say. Are u familiar with Veloce Motorspors in Kirkland? Any feedback or insight on them?
     
  4. jcurry

    jcurry Two Time F1 World Champ
    Silver Subscribed

    Jan 16, 2012
    23,638
    In the past
    Full Name:
    Jim
    #4 jcurry, Jul 9, 2024
    Home- 7 Lakes Motor Sports
    Mark's resume is pages deep in Ferrari experience. Good guy all around.
     
    f355spider likes this.
  5. GaryReed

    GaryReed F1 Rookie

    Feb 9, 2002
    3,127
    Seattle
    Full Name:
    Gary
    #5 GaryReed, Jul 13, 2024
    Yes, Josh is great at Veloce, but I'm not sure if he has a computer to hook up to a 458? Call and ask. Mark at 7 Lakes does have all the latest software and equipment and he's one of the very best in the business, but his shop is way up north in Arlington. If distance is not an issue, I would take it to Mark Glenwood.


     
    f355spider likes this.
  6. cudaman

    cudaman Rookie

    May 7, 2021
    39
    Full Name:
    David Lehmann
    #6 cudaman, Jul 16, 2024
    Appreciate all the recommendations and advice. Mark was too far away, so ended up going with Joshua Orr at Veloce. He actually was able to PPI the car the next day from when we spoke even though some of his other workers were out of the shop for various reasons, I was very happy with the PPI he performed. After he inspected the vehicle, he then called me and we spent time walking through specific questions I had while he viewed each item on the car. He sent all photos and comments the same day. And he was able to read the codes from the car. Highly recommend Joshua!
     
    RedStart and GaryReed like this.
  7. ferrarinewbie28

    ferrarinewbie28 Rookie

    Dec 15, 2023
    25
    Seattle, WA
    #7 ferrarinewbie28, Dec 4, 2024
    Definitely do not use Group 2 Motorsports. The stories I have heard are atrocious. Josh at Veloce is good, Mark is probably the best. Would also recommend Dima at German Autohaus - when he PPI'd my car, he found a power steering leak that the previous PPI had not caught.
     
  8. cwazy1

    cwazy1 Rookie

    Jul 5, 2024
    42
    WA
    #8 cwazy1, Dec 4, 2024
    g2 is good for anything retail. They have a great selection of motul consumables. Horror stories for restoration/repair work. Not first hand, but they've been through multiple restructurings and have had financial issues that were recently resolved.

    Veloce is good for general work, Josh is mostly a lambo shop, so he does not have a Leo/Galileo for Ferraris.

    Mark at 7 Lakes is great, just far. He used to be the service manager for Ferrari of Seattle.

    Dima at German Autohaus is my general recommendation for Ferrari work and where I go for the 'non DIY work' or advance programming. Hes got the Leo for all F/Lam/Mac models and has good turnaround. Solid all round with fair prices.
     

Share This Page