Phone mount for F12

Nice work! I ran into the same problem in my 911. Not always easy to source something that fits and looks factory.

 

That actually looks great! I may order one!

 

I'm in USA I'm not finding it on their website. I put in S60 and V60 here's what they show. Which one of these is it?

https://www.proclipusa.com/collections/dashboard-mounts-volvo-v60-2018

Looks kinda pricey but hey if it works!

 

Okay few questions.

1.) With the way it mounts do you foresee it causing any damage to the console in that area?

2.) Does it hold under high G loads (aggressive acceleration and cornering)? That was my biggest issue with previous cars of mine. Lots of trial and error of returning. Most mounts tend to hold for the boring driver in a 120hp commuter who never takes a turn faster than 15 MPH. The second you go have fun either the phone falls out or the mount moved.

3.) So I have a Pixel 6 Pro so basically buy that and buy one of these? ....and if I upgrade phone get one of similar size or just swap out the mount?
https://www.proclipusa.com/collections/phone-holders-google-pixel-6-pro#case:Slim To Medium Case||Power:Non-Charging||Power:Charging

 

So I just did a webchat with ProClip and I can paraphrase the conversation. I removed most of the links for product suggestions it's essentially most of the universal options that they have on their website.

CONVERSATION:

You
Looking for a mount for a car not listed

ProClipUSA
Hello, thanks for reaching out!
What make, model, year vehicle do you have?

You
2017 Ferrari F12

ProClipUSA
Nice vehicle! We currently don't have any mounts specific to Ferrari Vehicles or the F12, however, we do have universal options that may be compatible with your vehicle. I will provide those options below

You
can I show you what someone did? Tell me if you think it'll damage the car?

Someone on the forums bought one for a 2018 Volvo and said it fit and clipped here. Would this damage it?
uploaded file:
that's the four photos they sent me and used the Volvo mount

ProClipUSA
As each mount is designed for a specific vehicle, we can not guarantee that it would be compatible with your vehicle, and it may damage your interior.

You
that's what I figured it's designed to clip on plastic moldings essentially not leather yes?

ProClipUSA
Yes, the exact fit mounts are designed to fit in the seams of the dash via friction fit and not on the material itself

You
okay bummer. If I did take the chance and it didn't work is it an easy return process with your company?

ProClipUSA
Yes it is, however, after reviewing the photos, it appears that its only held on by the adhesive at the top. This would not provide the hold the mount is designed for. I would recommend viewing one of our adjustable console mounts
Are you in the Madison, Wisconsin area?

You
got it. No I'm in "XXXXX"

ProClipUSA
Yes. and I see. If you are ever near our facility in the area, if you would give us permission to use your vehicle to design and produce a mount, we would provide that mount free of charge

You
someone made the post on ferrarichat. I'll mention your suggestion and see if someone bites!

ProClipUSA
Sounds good. That interior is gorgeous by the way.
If you would like, I can make a car request and put your email on the list to see be notified if we ever release that mount.

You
thank you. Great car just zero mounting points and with circular vents it's a pain to mount there's really no plastic to clip around easily. Sounds good XXXXXX is my email. There's plenty of people on the forum there that are looking for a solution

ProClipUSA
Oh I am sure. A very popular option would be the pedestal suction cup mount I provided above. Its extremely strong

 

Rainier,
Do you think the mount would work in a RHD car ?
It would have to fit on the what would be the drivers side in your car, so the mount on top of the clip would need to be rotatable through 360 degrees.
I guess ?

 

I personally would not trade phone addiction for damaged interior in an F12. Too special of a car IMO.

 

Thanks for the information.
A shame.
I doubt they do mounts for RHD but will try to find out.
Graham

 

I take it back !
I did find this, it looks like the RHD twin of yours.
https://www.brodit.co.uk/brodit/vehicles/Volvo/V60/2020/635343.htm
What do you think, worth ordering and having a go ?

 

That leather is very thin there with no padding and some of these devices are heavy. It will undoubtably leave marks at the contact areas. I don't own a phone and would not have time to look away from the road at the acceleration in the F12. Sometimes I have a passenger and they will assuredly have a phone and can worry about navigation, etc. Meanwhile, I try to savor every minute behind the wheel.

 

Great find! Imho, I'd still like the device mounted higher, ie dash/vent level, until the day when my eyes can move independently of each other like a chamaleon

 

I tried a mount on the vents, I think they move far too easily for a stable mount, the shape doesn’t help either.
I will order a RHD version of Reinier’s mount and see how I get on

 

I did this. Just unscrew the center vent and replace it with a thin round plastic sheet. Screw it back together. Completely reversible at any time, without any sign.

New to the Tomball area.

 

Trying to add photo. Image Unavailable, Please Login

New to the Tomball area.

 

The arms and suction mount are available from Ram mounts. They are from Nav systems but they also do phone.

New to the Tomball area.

 

Care to post a "how to" with re-configuring that center vent. I like the idea that it's completely reversible.

 

I will try,
Pick a vent and unscrew this outer ring Image Unavailable, Please Login Image Unavailable, Please Login

New to the Tomball area.

 

Pop the vent insert out, it is very simple. Image Unavailable, Please Login Image Unavailable, Please Login

New to the Tomball area.