Oil filter wrench for 360?

I prefer strap wrenches like these. They don't harm the filter, and can usually fit anywhere.

--Matt

 

Get the factory filter wrench. It fits the best and isn't that expensive.

 

Here's a picture of the Ferrari wrench, you should be able to buy from any Ferrari dealer - UK prise is £13.00

Ferrari part# 95971560 or you could buy direct from the makers Usag, their part# USAG D156.

It also will fit 348, 355, Mon t, and F50

 

.....and of course you need to remove the cross bar on the cradle so that you can do the job, and clean away dirt before removing and any spillage after...

 

Malcolm -

USAG lists three different wrenches, but none match your SKU:

http://www.usag-tools.com/prodotti_gen.php?lang=it&filtra_per=0&id_famiglia=446

http://www.usag-tools.com/prodotti_gen.php?lang=it&filtra_per=0&id_famiglia=446%20S

http://www.usag-tools.com/prodotti_gen.php?lang=it&filtra_per=0&id_famiglia=446%20T


Probably the third cap wrench for Purflex filters... but what diameter?

-Daniel

 

Daniel,

It looks like your third link, I will see if we have one in stock and double check.

Also I think Facom make the same tool for Renault Peugeot and Citreon

 

The first picture is the actual size of the wrench, the second is the wrench itself.

 

A shot from the other side....

 

Isn't there a torque requirement for the filter? So I would think the wrench with the 3/8" drive would be the better choice.

 

Huh? I have never removed the cross bar..I just reach in from the side with a normal oil filter wrench.

 

Yes, we Ferrari owners sometimes get screwed (hahah... that's a pun)

http://www.autopart.com/TOOLS/TOOLSMAIN/tool/T_A261.htm

http://www.usahardware.com/inet/shop/item/04150/icn/20-316950/lisle/63600.htm


There's got to be an 86mm one on the internet somewhere...

-d