Oil change washers | FerrariChat

Oil change washers

Discussion in '348/355' started by blue90, Apr 24, 2021.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. blue90

    blue90 Formula Junior

    Dec 15, 2013
    339
    NJ
    Full Name:
    Dave
    #1 blue90, Apr 24, 2021
  2. blue90

    blue90 Formula Junior

    Dec 15, 2013
    339
    NJ
    Full Name:
    Dave
    #2 blue90, Apr 24, 2021
    The biggest one don't fit oil drain so medium size is oil.

    Sent from my SM-A716U1 using Tapatalk
     
  3. AceMaster

    AceMaster Three Time F1 World Champ

    Feb 6, 2009
    34,555
    Ontario, Canada
    Full Name:
    Mike
    #3 AceMaster, Apr 25, 2021
    There two oil drains.

    One back right corner, directly underneath the dipstick (requires a 22mm wrench or socket) One in the middle of the vehicle near the front of the engine that drains vertically (requires a 12mm hex)
     
    Qavion likes this.
  4. blue90

    blue90 Formula Junior

    Dec 15, 2013
    339
    NJ
    Full Name:
    Dave
    #4 blue90, Apr 25, 2021
    Thanks I used 22mm smaller washer on sump, medium size washer on oil. Why did Algar Ferrari ship a slightly wider 3rd washer?

    Sent from my SM-A716U1 using Tapatalk
     
  5. Qavion

    Qavion F1 World Champ
    Silver Subscribed

    Feb 20, 2015
    11,516
    Sydney
    Full Name:
    Ian Riddell
    #5 Qavion, Apr 25, 2021
    Perhaps one for the gearbox/transaxle, although some are offering the super expensive types with a neoprene seal. I've had so many wrong washers sent to me, I'm starting to wonder if my car is standard. On my last service, I ended up using one of the expensive types on the oil tank (rather than wait for them to send me the correct type).
     
  6. blue90

    blue90 Formula Junior

    Dec 15, 2013
    339
    NJ
    Full Name:
    Dave
    #6 blue90, Apr 26, 2021
    Yep it was for the Trans plug. Thanks. I did my other car LS3 oil too in comparing obviously LS filter media is bigger, smaller thread size and 8 smaller oil holes rather than purflux 6. The ferrari filter looks superior in design and quality for what you can find off the shelf for LS. Not looking at anything but quality and design comparison. Yes I save my old filters to make beer coolers. LS filter fits Foster's oil can, Ferrari or porsche fits heineken. Image Unavailable, Please Login

    Sent from my SM-A716U1 using Tapatalk
     
    Qavion likes this.
  7. PaulK

    PaulK F1 Rookie
    Silver Subscribed

    Apr 24, 2004
    4,616
    Michigan
    Full Name:
    Paul
    #7 PaulK, Apr 29, 2021
    Can we see these being used as beer coozies? Great idea and sounds really cool!
     

Share This Page