Another newbie question, I'm trying to remove the rear license plate frame on my F430, but there is a unusual-looking hex screw that I can't seem to remove and have never seen before. There is a pointed thing in the middle of the screw that gets in the way of the hex driver going in. I don't have anything in my toolbox to get it to go in. (Nothing in my Ferrari toolbox that fits either). Can anyone help me to identify it and what I need to remove it?
You need a security bit set - something like this: https://www.harborfreight.com/33-pc-security-bit-set-68459.html
Can you take a photo of the screw when you take it off ..I am missing them and would like to replicate original ..thanks Sent from my Moto G (4) using Tapatalk
You need security bits. They have a hole in them to accept the pin in the middle. Sent from my iPhone using FerrariChat.com mobile app
Do you know which size ..I don't have any reference since no screws are there and if too long they will hit diffuser..thanks Sent from my Moto G (4) using Tapatalk
