Interior door handle removal | FerrariChat
Buy

Interior door handle removal

Discussion in '458 Italia/488/F8' started by adamellisdj, Dec 19, 2020.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. adamellisdj

    adamellisdj Karting

    Dec 15, 2020
    214
    Full Name:
    Adam Ellis
    #1 adamellisdj, Dec 19, 2020
  2. 338Lapua

    338Lapua Formula Junior

    Sep 5, 2015
    829
    Michigan
    Full Name:
    Tony
    #2 338Lapua, Dec 19, 2020
    If I recall correctly, you need to lift the lever up and remove the screw which is located directly below it. Once you have it free, you'll need to remove the cable from the lever as well.
     
  3. ridege55

    ridege55 Formula 3
    Silver Subscribed

    May 9, 2017
    1,383
    Manhattan Beach, CA
    Full Name:
    John
    #3 ridege55, Dec 23, 2020
    I did this and replaced with Myricambi door handles as you have. FYI, I did have fitment issues with 2 sets they sent me. Also, for the last set, the hole for the bowden cable is too far forward and does not allow for slack. As a result, the door does not lock when actuated.

    Removal of door handles is not too difficult. You do have to lift the handle to reveal a screw. The screws on my handles were extremely tight, so just be aware so you do not strip them. Here are some instructions from the MACarbon site. I have their door handles on my F430 and think the quality is better. Note that I did not disconnect my battery when installing both.

    Image Unavailable, Please Login

    Image Unavailable, Please Login
     

Share This Page