Does anyone know the procedure to remove and replace the rear F355 badge? It cannot be that hard, but struggling to get access to it. Any help would be great. Image Unavailable, Please Login
There are 4 screws on top and two rivets on on the underside that secure the grill in place. The badge is secured with tape and two push clips.
Replacement rivets are, 1/8" Diameter, .063"-.125" Material Thickness Range, Domed Aluminum with Steel Mandrel. Link for reference. http://www.mcmaster.com/#97517a015/=t8y7ms courtesy of Dave Lelonek.