High heat flat black paint for rear challenge grill | FerrariChat

High heat flat black paint for rear challenge grill

Discussion in '360/430' started by 911gt3, Jun 17, 2020.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. 911gt3

    911gt3 Karting
    Silver Subscribed

    Oct 31, 2014
    101
    Louisville, KY
    Can anyone recommend a high heat flat black paint to touch up the rear challenge grill on a 360?

    Thanks in advance.
     
  2. Need4Spd

    Need4Spd F1 Veteran

    Feb 24, 2007
    6,644
    Silicon Valley
  3. 911gt3

    911gt3 Karting
    Silver Subscribed

    Oct 31, 2014
    101
    Louisville, KY
    Thanks—I’ll check it out.
     
  4. KC360 FL

    KC360 FL Formula 3

    Jun 20, 2017
    1,677
    Melbourne Florida
    Full Name:
    KGC
    Do a test spray out. Some of the header paint is very flat black. Not really a match if that matters to you. I have used the ACE Hardware brand Satin Black on a lot of parts that need just a touch of gloss. I don't think the rear grill will get hot enough to affect it. I've used it on engine brackets.
     
    RANDY6005 and 911gt3 like this.
  5. Skidkid

    Skidkid F1 Veteran
    Owner Rossa Subscribed

    Aug 25, 2005
    8,682
    Campbell, CA
    Full Name:
    John Zornes
    You likely don't need that high of heat resistance in the paint. Many paints are good to 300-350 and engine paints are good to 450 or so and some up to 650. Then there are high heat (most are black) and they go quite high. I would be surprised if the challenge grill saw much over 200 so this should be pretty easy and within the reach of most paints.
     
    KC360 FL and 911gt3 like this.

Share This Page