[FF] How to open valves ? | FerrariChat

[FF] How to open valves ?

Discussion in 'FF/Lusso' started by Astont, Nov 8, 2014.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. Astont

    Astont Rookie

    Jan 22, 2013
    37
    Los Angeles
    Full Name:
    Teddy
    Hi,

    Does anyone know how to have valves always open on the FF ?

    Can we unplug vacuum line ? Is it easy to access ?


    Thanks a lot
     
  2. j09333

    j09333 Formula 3

    May 7, 2004
    1,142
    nope it is quite hard.
    I begged service 3 times to do the job.
    They told they removed quite alot of rear bumper assembly to get to valves.
    I assume removing bumper might be easier than removing inner wheel arch protection thing.
     
  3. Astont

    Astont Rookie

    Jan 22, 2013
    37
    Los Angeles
    Full Name:
    Teddy
    Did they charge you ?
     
  4. Noblesse Oblige

    Noblesse Oblige F1 Veteran

    Nov 7, 2011
    6,114
    Three Places
    Maybe easier just to invest in the Capristo switch?
     
  5. SRRY4RE

    SRRY4RE Rookie

    Sep 15, 2014
    21
    Tampa FL
    Full Name:
    Matt
    I'm leaning heavily in this direction. I'll contact dealer this week for more info and total cost for install. Then Ill see if I can't post some pics and before/after video.
    BTW, to me the exhaust sounds perfect when on the throttle, I'm just trying to turn the volume up a bit at startup and slow rolling idle.
     
  6. rjn21

    rjn21 Karting

    Dec 3, 2013
    154
    UK
    Put on lift, loosen rear undertray section (no need to remove completely), put hand up into exhaust muffler section pull off the blue vacum line. Takes at most 10 minutes inc getting the car on and off the ramp.
     
  7. SRRY4RE

    SRRY4RE Rookie

    Sep 15, 2014
    21
    Tampa FL
    Full Name:
    Matt
    Sounds easy enough. Thanks for the info!
     

Share This Page