Ferrari F12 Back Up Camera Retrofit

Hello,
Today I did the back up camera retrofit on my F12,
My car doesn't equipped with it, so in order to make a retrofit I need to Bought a Leonardo device and in order to do Proxi Coding change
The Installation mostly straight forward, All plug and play, I bought the Cable from Ferrari.
Because I don't want to do the front yet, If you want to do the Front You need to add the switch box and a button.


Image Unavailable, Please Login Image Unavailable, Please Login Image Unavailable, Please Login Image Unavailable, Please Login Image Unavailable, Please Login

 

Here is the procedure how to change the Coding by Leonardo
1st : Go to proxi coding option which on BCM then read the car data
2nd : change Rear view camera to Present & Display rear view camera
3rd : Write proxi option change then after that do Proxi Alignment then all done.

Image Unavailable, Please Login Image Unavailable, Please Login Image Unavailable, Please Login

 

Here is the Backup camera cable you need
Ferrari Part : 266797


and here is the wiring diagram for anyone who interest in doing retrofit
Image Unavailable, Please Login Image Unavailable, Please Login

 

@colonels : I install it on the foglight location, it is same place as original Ferrari Camera install, all look Factory.
About programing
There're many issue can cause programing failure, even at the dealer.
The Galileo only change the coding data, not programing. So it wrong to blame it.