Electric door mirrors auto dipping for reverse

Hi all,

Anyone else had a similar issue ... I put the car in reverse, the mirrow on the passenger side dips a little, as it should ... I then back it in the garage, to get it in the garage, I have to turn the mirrors in ... I then park the car and get out.

Next time I use it ... and once of the garage, I turn the mirrors out ... however the left / passenger mirror is still pointing down ?

So I have to reposition the mirror every time I get the car out of the garage ... any ideas how to fix this / work arounds ?

Cheers ....

 

I'm wondering if after you select reverse, mirror drops, then I have to turn them in to get it into my garage and on starting the car next time and driving it out the garage and putting the mirrors out ... it's forgotten that it dipped them .. hence I have to put the passengar side one back up ? Anyone else suffering this ?

 

Thanks ... kind of you to respond, I acknowledge what you say, so it works fine when out and about, reversing, it dips, I park and then it resets fine. It's just overnight, when going back to my garage ... I reverse in the garage, it dips, I then turn the mirrors in to fit into the garage. It stays dipped whilst parked, the next day I get the car out ... when out I put the mirrors out again and it's still in the dipped position, so I have to reset it manually to being level ?

 

I tried that ... but because the mirrors are turned in when I finish reversing, I did put it back into first pre turning off the engine, but it didn't turn the mirror back up again ... perhaps because the mirror is turned in ?

 

When you have the engine running, put the car in reverse, use the mirror adjustor button to reposition to where you would like it to point in reverse, then put it back in first and it should then rise back to normal level ... if you have electric seats, push the memory button, 1,2 or 3 and then it will retain that setting for each time you put it in reverse !