Diverter valve mount | FerrariChat

Diverter valve mount

Discussion in '206/246' started by Paul Root, Mar 26, 2020.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. Paul Root

    Paul Root Rookie

    Nov 18, 2018
    30
    Full Name:
    Paul Root
  2. synchro

    synchro F1 Veteran

    Feb 14, 2005
    9,294
    CHNDLR
    Full Name:
    Scott
    It is a simple Z bend of sheet metal with a brace, you could probably make one yourself.
     
  3. Paul Root

    Paul Root Rookie

    Nov 18, 2018
    30
    Full Name:
    Paul Root
  4. synchro

    synchro F1 Veteran

    Feb 14, 2005
    9,294
    CHNDLR
    Full Name:
    Scott
    This should be simple to fab as you know where it goes and that gives you the bolt center dimensions from the mounting points.
    The back was missing on mine so I inserted a flared piece to clamp the hose to. I push the hose all the way to the plate so nobody sees my kluge
     
    Paul Root likes this.

Share This Page