Anyone using curb ramps?

I just throw down a 2x8. $6 at homedepot and get a new one every season
I pick it up when not in use for street cleaning

 

Problem is it is expensive so you'll need to put it down every time you leave, pick it up, put it away before you drive off, then do the reverse when you get home. Seems like a very cumbersome process. Throw a 2x8 there and just leave it. If it gets taken a few bucks replaces it.

 

I have a similar situation getting cars out of my carriage barn, due to the relative steepness of the entry ramp. Made a couple "bridges" out of plywood and some scrap block. Throw em down, back the car out, put the "bridges" back in the barn and go. Cheap and easy.

 

I had my driveway skirt and sidewalk re-poured at a less sharp angle. My issue was the driveway skirt as it was too steep so I combined it with the sidewalk to get a few more degrees slope over a longer run.

I'd you just need length to the step down these are much longer.
https://www.uline.com/Product/Detail/H-1788/Hand-Trucks/Poly-Curb-Ramp

Sent using FerrariChat.com mobile app