Alternative Loctite 9466 Hysol easier to find than Loctite 9360 Hysol for ball joint installation | FerrariChat

Alternative Loctite 9466 Hysol easier to find than Loctite 9360 Hysol for ball joint installation

Discussion in '360/430' started by collegeboy, Apr 4, 2023.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. collegeboy

    collegeboy Formula 3
    Silver Subscribed

    Aug 25, 2007
    1,306
    Texas and Kaua’i
    Full Name:
    Mikey
    I wanted to post this here in case it would help anyone else.

    In order to install my ball joints, I needed to get Hysol. In my WSM, it calls for 9360. Wonderful stuff, but it appears to be impossible to get right now in 50mm tubes. I literally could not find any online except for 1 random tube on Ebay over a month ago, unless I bought 500ml huge containers of it.

    Doing some digging, I found that in 2015 Ferrari's ball joint replacement instructions, they now say to use Loctie 9466. I assume it is great stuff if they made the apparent change to it, so I bought that a month ago for my ball joints. As a bonus, it is easy to find, and as of today, it can be bought on Ebay for about $25 a tube. I did get lucky and found a tube of 50ml 9360 as well on Ebay, but will be using the current product used by Ferrari, 9466.

    Hope this helps someone else.

    Instructions below.....

    SB-10058331-5304.pdf (nhtsa.gov)
     
  2. ItalGerBrit

    ItalGerBrit Formula Junior

    Mar 15, 2016
    898
    S La
    When I was unable to find the Hyosol adhesive early in 2001, I ordered a ball joint kit from Perkom-USA that included adhesive. Working just fine so far.
     
    collegeboy likes this.

Share This Page