612 (front) inner tie rod

I have a 2008 612, I need to replace the driver's side (left) front, inner, tie rod. The steering rack is in good condition and does not leak. The dealer only sells the rack which has the inner tie rods attached. Is there anywhere that has (only) the inner tie rod available for purchase? I can't imagine having to change the entire rack for a bad inner tie rod. Is there a Maserati interchangeable tie rod? Any help is appreciated!

 

Thank you for the replies. I contacted Hill Engineering yesterday and they don't offer the part nor do they know where I can get it. I also contacted TTX in Canada and ADOC in Houston and neither one of them could help. Last year I did purchase the outer tie rod ends from Hill Engineering and was quite happy with the product. The link that was sent to me in the previous message is for just that, the outer tie rod. I found that Autoricambi D'Epoca out of Italy has the inner tie rods but they are very slow to reply to emails and want 760 Euro for two inner tie rods which I find a bit high but necessary if I can not find them elsewhere. I have found someone who sent me an engineering diagram this morning of an inner tie rod that is within 1-2 mm tolerance of the original part. I am waiting on a price and if I order the part I will compare it with the original and post photos. It hard to believe that the answer from Ferrari dealer on how to repair the inner tie rod is to replace the entire steering rack for 10,000 Euro for just the part. I assume the inner tie rods ware out just as the outers do, but to find them seems like an almost impossible task and can't believe I am the first to experience this problem.

 

I was looking particularly for the inner tie rods. My rack is still good and does not leak. I just purchased two tie rods from the guy who sent me the engineering diagram for $150 each including shipping. Looking forward to getting them and seeing how they fit.
Image Unavailable, Please Login

 

Thank you for the offer. I received the parts last week and installed them over the weekend. They fit perfectly. I have attached a photo of the old one (left) and new one (right). The car is at the dealership now getting the alignment done.
Image Unavailable, Please Login

 

I asked the seller what other vehicles it fit and he said 599 GTB. I am sure there must be others but I assume he did not want to tell me. He now is selling them on EBay for $300 each, that is what I paid for two. I did attach the measurements of the part on an earlier post but am not sure how to use that information to locate the part from another supplier. I am happy with the results and $300 was better than paying for a new steering rack.

Where would I find the alternative parts list? I would be interested in looking at it and contributing to it when I find parts.

 

I was told the inner tie rod for the 612 and 599 are the same. Also the left and right are the same. I changed both mine in less than 30 minutes before taking the car to the Ferrari dealer to do an alignment on all four wheels. I bought the inner tie rod removal tool at Amazon for $25 that made the job much easier.

 

Image Unavailable, Please Login

 

https://www.ebay.com/itm/395161937784

Above is the eBay link. I paid $150 but looks like he has raised the price but there is still the many an offer option. Good luck!

 

They are also very easy to replace. I did both sides in about 40 minutes. An alignment will be needed after the install. Good luck!