488 Wheel and Tire advice needed 20-21 or 21-22

Robert, is there a reason you don't want to use the stock wheels? 20" will have more tire options than either 21 or 22. As to specific track tires, smaller wheels are usually the way to go when you start talking these sizes, more sidewall, cheaper tires, better tire options, etc. If I was going to spend anytime on track, I wouldnt consider anything over 20, unless I had to in order to maintain aspect ratios that I couldnt achieve with a 2o" set up.

As to "less than an inch" comment, what are you using that in reference to as for measurement?

 

then, given what you're after, I would do 20/21 in the new mpsc2 N2 if you can wait or the N1 if you need them now.

 

So we have done a ton of both setups, and to be honest it comes to personal preference.

The 20/21 setup is my favorite because we are able to run a 21x13 rear with the new Pirelli PZ4 or Pirelli’s new Corsa Tire in 355/25/21 and they are fantastic. Once lowered on the Novitec springs the car just has a planted look and feel.

With the extra power the 488 has, and for spirited droves the 20/21 really is the way to go. That’s not a knock on the 21/22 but that is a stunning look, it’s just comes down to driving style and what you’re looking to get out of it.

Here is our Rosso Scuderia 488 Spider on 20/21 HRE P207’s and Pirelli PZ4 Rubber and novitec goodies for reference.

Also - you can feel free to check our our Gallery Section of our web site for some more images and options of other vehicles we have completed including 458's and 488's on 21/22's and 20/21's! CLICK HERE



Here shows our 488 Coupe on the 20/21 HRE P204 Wheels as well



Feel free to reach out for more questions.... were always here to help

Image Unavailable, Please Login
Image Unavailable, Please Login
Image Unavailable, Please Login
Image Unavailable, Please Login
Image Unavailable, Please Login ​

 

21/20

 

245/35 and 355/25 is what is suggested and will work best on the car.

 

is there a reason you didnt do 255/35/20 on fronts?

 

Typically unless we go 9.5" wide on the front (which we don on a 21" wheel) we stick with the 245/35/20 (same as OEM) on the 20x9 front wheel. It just keeps the Overall diameter in line with the rears as much as possible. We have found its the best solution.

 

what ET is suggested for the 20x9 and 21x13 staggered setup for the best look without spacers?

 

Good Morning Hoang, I hope the below information helps you out brother.

Is there a particular wheel that you have in mind? I'd be more than happy to price out a wheel and tire package for you.

Thanks Brother,

Cheers,

Best fitments for standard height

20x9 et38 245/35-20 - 21x13 et45 355/25-21


Best fitments for lowered height

20x9 et30 245/35-20 - 21x13 et40 355/25-21