360 Workshop Manual

Hello from France, can you help me with vol 1 workshop manual ? I need torques and more to replace cam belts and hydraulic tensioners in my blue meca gearbox 360 Modena ?
Really difficult to find corect informations.
Regards
Phil.C

 

https://www.sendspace.com/file/c57mtj

 

Thanks, Wayne. I can't say I've seen this English-only version before. I see it includes the child safety system fitted to 2003 US cars, so it looks like a later version of the one I have.. and in colour!

Unfortunately, it doesn't have a full set of wiring diagrams (just snippets). I was hoping to find a corrected version of them (a few errors in the old ones).

 

Hello,

I am looking for the manual 2000 360 Coupe

I am a mechanic and looking forward to working on my car soon!

Here is my email

[email protected]


Sent from my iPhone using FerrariChat.com mobile app

 

Hello,
Many thanks to Reddesire and wbt for help.
Works in progress, some specials tools are needed to make a good job.
Regards,
Philippe C.

 

Does anyone know if this manual is still available?

Thanks

 

Yes, I got it about a month ago or so. If you PM me I think I can get it to you.
Joe

 

Loving these wiring diagrams you did. Great work!

 

Yep I'm still hangin around

If interested PM me unless someone esle has already given you a set

 

Someone else helped, but thanks for answering

 

Hey
Wondering if this is still active and if you could help out

Thanks


Sent from my iPhone using FerrariChat.com mobile app

 

Yep, still here. PM me your email

Best Regs from Oz

 

Thank you sire! I had the "old version", downloaded from F-chat around 2017 but this is much better, far better resolution and color pictures. Really appreciated.

 

PM’d

Thanks

 

Does anyone have a Challenge Stradale workshop manual? I'm having a bugger of a time trying to find one. Thank you.

 

G'Day

I can look after you with this. PM your email address. Too much to post. I'll send a DropBox link !

 

Thank you! I should have updated this but Terry is sending me a copy in the mail. Thank you though!

 

Glad you found one. Cheers !

 

Hello Reddesire348,
could you please PM me the 360 Spider workshop manuals as well? It looks like I cannot send PMs because I am new to the forum.
I got a wonderful 360 Spider manual in TDF blue in autumn and the top doesn't open anymore
Thanks, Ondrej

 

Hi all,
I have a 2002 360 F1 Spider and the roof opens and closes physically. However, upon opening, the car never seems to believe the roof completes the opening cycle. It appears that the sensor telling the car that the roof is in the proper closed position is not functioning or out of alignment. Is there a manual that can help me diagnose and fix this problem?

Thanks in advance.

 

The Workshop manual (Section N) covers some of this but the majority is either experience or gall. If you have an OBD tool that can read the real time data from the capote ECU, you can watch the various switches open and close. @Qavion has some pretty excellent wiring diagrams that may help a lot more than the manual. The capote, if it hasn't been squished by a size 20 photoshoot, is pretty robust and DIY friendly.

 

If you PM me your email address I'm happy to send you a dropbox link for the manuals which includes the Roof section N and a pile of other stuff (too much to post herfe). Section N is very detailed however covers more the mechanic removal and install side of things. As suggested I don't think it will have the level of diagnostic detail you need to sort your problem.

 

Here's an overview of the sensors/signals involved at various stages of roof opening/closing:

https://www.dropbox.com/t/GL5zoxllAj7umn70

... and here's a wiring diagram (work in progress) which should allow you to check the resistances of various sensors (from the Roof ECU plugs).

https://www.dropbox.com/t/hpJZhRL448cM31eZ

Note that both documents have codes for the sensors ... e.g. EVVA-R, EDZ, ESDA, etc.

The sensors involved in the final stages of roof opening are shown here:

Image Unavailable, Please Login
I guess it could be any of the sensors (in blue) in step 10 causing your problem, that's why it might be a lot easier to just to take the car to someone with specialist fault code reader. It could be a bent/faulty switch or a mechanical issue causing the problem.

Experts?

Links expire in 6 days

 

Wow, great info and I have taken a copy (and pray I never need it ) good luck with following that. At least it gives you the chance to check relevant fuses etc.

 

ah.. fuses... I forgot they were in a different wiring diagram...

https://www.dropbox.com/t/3dyFkXeA0hYlCNUS

Shown in the bottom left hand corner (or thereabouts)

Plug 31H/1Q is the common link between the two diagrams.

Doesn't sound like a fuse issue, though.