360 wiring diagram | Page 4 | FerrariChat

360 wiring diagram

Discussion in 'Technical Q&A' started by gphodge, Aug 31, 2010.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. Qavion

    Qavion F1 World Champ
    Silver Subscribed

    Feb 20, 2015
    11,484
    Sydney
    Full Name:
    Ian Riddell
    And so it did....

    90% of the information in the wiring hookup charts in the WSM has now been converted into old-fashioned wiring diagrams...

    Here's an example.... the ABS/ASR wiring diagram:

    https://www.dropbox.com/t/ruHKnKKY7a40w906

    It will have the usual Ferrari wiring diagram errors .... e.g. according to Ferrari, the power for the right bank engine sensors powers the mirror heat (highly unlikely). I usually highlight the error with a "TBC" (to be confirmed) or a question mark.
     
    MCASEY likes this.
  2. Qavion

    Qavion F1 World Champ
    Silver Subscribed

    Feb 20, 2015
    11,484
    Sydney
    Full Name:
    Ian Riddell
  3. Qavion

    Qavion F1 World Champ
    Silver Subscribed

    Feb 20, 2015
    11,484
    Sydney
    Full Name:
    Ian Riddell
  4. Qavion

    Qavion F1 World Champ
    Silver Subscribed

    Feb 20, 2015
    11,484
    Sydney
    Full Name:
    Ian Riddell
  5. Qavion

    Qavion F1 World Champ
    Silver Subscribed

    Feb 20, 2015
    11,484
    Sydney
    Full Name:
    Ian Riddell
  6. Qavion

    Qavion F1 World Champ
    Silver Subscribed

    Feb 20, 2015
    11,484
    Sydney
    Full Name:
    Ian Riddell
  7. Qavion

    Qavion F1 World Champ
    Silver Subscribed

    Feb 20, 2015
    11,484
    Sydney
    Full Name:
    Ian Riddell
  8. Qavion

    Qavion F1 World Champ
    Silver Subscribed

    Feb 20, 2015
    11,484
    Sydney
    Full Name:
    Ian Riddell
  9. Qavion

    Qavion F1 World Champ
    Silver Subscribed

    Feb 20, 2015
    11,484
    Sydney
    Full Name:
    Ian Riddell
  10. tazandjan

    tazandjan Three Time F1 World Champ
    Lifetime Rossa Owner

    Jul 19, 2008
    37,986
    Clarksville, Tennessee
    Full Name:
    Terry H Phillips
    Ian- Great work. Saved to hard drive. Will have to see about converting the gifs to pdfs. Need to send you some money to help with Dropbox costs.
     
    Qavion likes this.
  11. Qavion

    Qavion F1 World Champ
    Silver Subscribed

    Feb 20, 2015
    11,484
    Sydney
    Full Name:
    Ian Riddell
    As you know, Taz, I'm always tweaking the diagrams. Converting them to pdfs kind of freezes the development.

    Thanks for your kind offer, but for now, I'll stick with the free Dropbox account (with the 6 day limit). I can't justify spending all that money on full account. When the links go dead, people know where to find me ;). It's no chore reposting and I can get involved with the faultfinding.... which is part of the learning process (and tweaking process).
     
  12. Qavion

    Qavion F1 World Champ
    Silver Subscribed

    Feb 20, 2015
    11,484
    Sydney
    Full Name:
    Ian Riddell
    There are some real faultfinding gems in these wiring diagram. I thought I'd wired up the HVAC diagram incorrectly. The hot water recirculation pump fuse is shown as supplying power to one side of the coil on the AC compressor relay. I rechecked the wiring and it was correct. A blown hot water pump fuse has the potential to stop the AC compressor working.
     
  13. eric355

    eric355 Formula 3
    Silver Subscribed

    Nov 30, 2005
    1,158
    Toulouse (France)
    Full Name:
    Eric DECOUX

    Attached Files:

    Qavion likes this.
  14. Qavion

    Qavion F1 World Champ
    Silver Subscribed

    Feb 20, 2015
    11,484
    Sydney
    Full Name:
    Ian Riddell
    Thanks Eric!

    It might take me a day or two to incorporate the data in those charts... Standby!
     
  15. Qavion

    Qavion F1 World Champ
    Silver Subscribed

    Feb 20, 2015
    11,484
    Sydney
    Full Name:
    Ian Riddell
    Here's an updated diagram for the RH engine harness (version 2):

    https://www.dropbox.com/t/h70iMTmbeNPJWROB

    I'm not sure what a "pump current LSU" is (in relation to the O2 sensors) and why there are two of them on the downstream sensor, but I've added the labels anyway.
    Also, the workshop manual shows a mini-graphic with a plus and minus on the throttle motors, but the ECU pinout shows two plusses. I assume the voltage changes polarity when you change a motor's direction.

    Learning lots of stuff:
    I didn't realise the F360 MAFs had built-in inlet temperature sensors (as well as airflow sensors).
    There is a knock sensor for every two cylinders.
     
    EastMemphis likes this.
  16. Qavion

    Qavion F1 World Champ
    Silver Subscribed

    Feb 20, 2015
    11,484
    Sydney
    Full Name:
    Ian Riddell
    EastMemphis likes this.
  17. Qavion

    Qavion F1 World Champ
    Silver Subscribed

    Feb 20, 2015
    11,484
    Sydney
    Full Name:
    Ian Riddell
    The instrument panel/cluster seems to have an excess of inputs and outputs and I'm trying to make sense of them. Perhaps an F360 owner can clarify the following:

    Does opening the frunk inhibit the wipers or... does operating the wipers stop the frunk opening? If the latter, does it stop the frunk opening at all or does it stop it opening past a certain point?

    The Owners Manual has this snippet of information:

    Image Unavailable, Please Login

    A "lever" inside the frunk sounds mechanical. How is it inhibited by speed? Is this system related to the wiper inhibit (if there is one)?

    If you use the electric frunk opening button on the centre console, do you still need to use the safety lever to open the frunk all the way?

    Thanks!
     
  18. tazandjan

    tazandjan Three Time F1 World Champ
    Lifetime Rossa Owner

    Jul 19, 2008
    37,986
    Clarksville, Tennessee
    Full Name:
    Terry H Phillips
    Ian- This is part of the DOT requirement that folks trapped inside the luggage compartment have a way of getting out. Since the luggage compartment is up front, it is not safe for the lid to open above 5 kph, so it just pops up to the catch to allow ventilation for the trapped idiot.
     
  19. Qavion

    Qavion F1 World Champ
    Silver Subscribed

    Feb 20, 2015
    11,484
    Sydney
    Full Name:
    Ian Riddell
    That part makes sense, Taz. It's just how a mechanical lever knows what 5 kph is that confuses me. The text says that the frunk can be fully opened by that idiot lever below 5 kph.
     
    safespeeder likes this.
  20. Qavion

    Qavion F1 World Champ
    Silver Subscribed

    Feb 20, 2015
    11,484
    Sydney
    Full Name:
    Ian Riddell
    #95 Qavion, Apr 2, 2021
    Last edited: Apr 2, 2021
    Just a tip on reading my diagrams:

    The primary wire colour I draw all the way through the connectors. The stripe colour stops at the edge of the connector. Note that the stripe line could be on any side of the wire (right or left, below or above). Or you could just read the colour codes. The first letter is the wire colour.

    Image Unavailable, Please Login

    Also, a warning... I don't have an F360 to play on, so I'm not sure on which side of the connectors are pins and on which side are sockets. Don't use the connector graphics to determine which direction the wires go on your car.

    I started creating a wiring diagram for the immobiliser system, but then I realised that there are just too many black wires attached to the alarm interface unit with no way of figuring out which one goes where. All 6 black wires go to the same connector (16H)

    Image Unavailable, Please Login
     
  21. Qavion

    Qavion F1 World Champ
    Silver Subscribed

    Feb 20, 2015
    11,484
    Sydney
    Full Name:
    Ian Riddell
  22. Qavion

    Qavion F1 World Champ
    Silver Subscribed

    Feb 20, 2015
    11,484
    Sydney
    Full Name:
    Ian Riddell
    The wiring pattern seems to be very similar to the 550. Anyway, I created as much of the immobiliser diagram as I could:

    https://www.dropbox.com/t/sNEv2YurNT8Iro7Z

    It's interesting to see that one of the power sources for the Immobiliser ECU is the luggage compartment light fuse. Probably not to power the ECU, but to check that the luggage compartment lid switch has power.
     
  23. Qavion

    Qavion F1 World Champ
    Silver Subscribed

    Feb 20, 2015
    11,484
    Sydney
    Full Name:
    Ian Riddell
    MCASEY likes this.
  24. Qavion

    Qavion F1 World Champ
    Silver Subscribed

    Feb 20, 2015
    11,484
    Sydney
    Full Name:
    Ian Riddell
    #99 Qavion, Apr 4, 2021
    Last edited: Apr 4, 2021
    Updated HVAC diagram (version 3)

    https://www.dropbox.com/t/QBBOcK5CHZIQyfEz

    I missed some labels on a few critical components. I also added more graphics for easier component identification, some location notes and some internal wiring of components (although I'm not sure of the potentiometer wiring on the hot water "TGK" valve).

    Can't figure out how to delete old Dropbox links...
     
    MCASEY likes this.
  25. 74dino246gts

    74dino246gts Karting

    Aug 6, 2004
    126
    Northern California
    On the drop box page, if you click on the preview icon (next to the down arrow icon) it will bring up the drawing and then you can save it as a pdf. Hope this helps.
     
    Qavion likes this.

Share This Page