360 will not run | FerrariChat

360 will not run

Discussion in 'Technical Q&A' started by stnilsson, Jul 2, 2020.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. stnilsson

    stnilsson Karting

    Jul 4, 2007
    150
    Helsingborg
    Full Name:
    Stefan Nilsson
    Have some trouble with my 99 F1 360. It starts and the almost immediatly dies. It won´t change gear with the engine off but I can hear a changing sound from gearbox when I pull both paddles. Clutch pump is ok and runs. I bought a Foxwell NT 530 Ferrari scanner and the message I get is "DTC--Engine turned off by f1 gearbox (b1)" Any clue to what´s wrong? Is the clutch gone or something worse?
     
  2. EastMemphis

    EastMemphis Formula 3
    Owner Silver Subscribed

    May 25, 2019
    1,719
    Memphis, TN
    Full Name:
    John
    Since there's no DTC in the 360 (single plate clutch), maybe you're seeing an erroneous text message. What's the actual code?
     
  3. stnilsson

    stnilsson Karting

    Jul 4, 2007
    150
    Helsingborg
    Full Name:
    Stefan Nilsson
    Does the sensor measure the thickness of the clutch everytime the engine is started and could that be the problem if it finds it to worn?
     
  4. stnilsson

    stnilsson Karting

    Jul 4, 2007
    150
    Helsingborg
    Full Name:
    Stefan Nilsson
    The code is P1 586
     
  5. tbakowsky

    tbakowsky F1 World Champ
    Consultant Professional Ferrari Technician

    Sep 18, 2002
    19,349
    The Cold North
    Full Name:
    Tom
    You have a hydraulic pressure problem in the F1 system. Get it looked at by a competent shop with the right tools.
     
    2NA and brian.s like this.

Share This Page