328 clutch bearing question | FerrariChat

328 clutch bearing question

Discussion in 'Technical Q&A' started by keef53, Jul 16, 2021.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. keef53

    keef53 Rookie

    Apr 23, 2012
    1
    UK
    #1 keef53, Jul 16, 2021
    Hi hope some one can help me. I have a 1988 pre abs 328. I am assembling the clutch etc I bought the car in bits. My question is on my clutch release bearing/carrier it has no provision for a return spring or the spring clip that attaches to the forks. I seen them on 308. Is this correct did they do away with the clip.
    Thanks in advance
     
  2. Steve Magnusson

    Steve Magnusson Two Time F1 World Champ
    Lifetime Rossa

    Jan 11, 2001
    25,147
    30°30'40" N 97°35'41" W (Texas)
    Full Name:
    Steve Magnusson
    #2 Steve Magnusson, Jul 16, 2021
    They changed the design from a non-contacting throw-out bearing with clutch pedal up (which needs the spring clip holding the throw-out bearing to the fork) on carb 308 to an always contacting throw-out bearing with clutch pedal up sometime in the 308i model years IIRC. Your 328 doesn't need the spring clip, and the SPC figures are often useful assembly references:

    https://www.ferrariparts.co.uk/diagram/ferrari/328-gtb-gts-(1985)/023-clutch-and-controls
     

Share This Page