© 2024 DRIVEN LIFESTYLE. All rights reserved.
This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.
"b" and bertone came (afasik only) in plastic with 2 pins in the back, which were counter fixed from inside the fender. The pins are fragile and...
Hello Mark, the joints at front quarters, rear quarters, rockers were filled with sealer. At the beginning and End of the joints evenly filled to...
... the regulator is an external type, situated under the dash / foot compartment drivers side. BOSCH. good luck. Marek
... interesting story and nice work at 337! But I am still wondering regarding the lime-greenish interior color. Neither the article foto of...
there is a small aluminum decal ca. 20x45mm, that is nailed not riveted on the block with a number punched on it. in the attached foto between...
Hello Ivan, it is really recommended to balance the wheels because of the given imbalance even of new tires. As the diameter of the center hole...
Many Thanks Gentlemen! @ staatsof yes, I added an mechanical oil gauge and came to the conclusion that the oil pressure in reality is fine but...
Some help is requested regarding the oil pressure sending unit, because mine display is reading too low; the dash instrument/display seems to be...
Hello Ivan, the covers are made of grey Thermoplastic, covered with velours fabric (lets call it mouse hair, but different from the ferrari mouse...
Hello Achim, the item 37 on Tav1 is the spring (Spiralfeder) which tightens the valve shaft seal. The valve shaft guides hold through...
Hello Ivan, adjusting the Khamsin engine at 6-10° before TDC is a recommended starting point while the airpump system & micro switch stays...
Looking up the fotos on face book there are coming some issues at least to my mind. The goal while machining and honing the Maserati block is to...
... I know at least 4 original cars were the grilles are greyish charcoal, flat to semi flat finish. Up to now I know no original car with black...
hello paul, as always: it is super following your reports. probably a misunderstanding, but a longer conrod reduces piston & cylinder side loads....
Interesting! Does the leather of the center console exactly match the rest of the interieur? The exhaust could be a Jarama GTS derivate. A...
At the end of 1969 at the so called Interimsmodel (between 1&2) Lamborghini experimented with a plane perforated sheet metal (with square hole...
if you intend to replicate the pouch, please let me know. best, marek
Hello Ivan, I was able to source the nylaflow material some years ago and will check availability again. The lettering is a bit different and is...
Hello Olaf, you interior looks promising. good that you kept the leather ... try this italian supplier for rubber mats:...
Superb. Thanks Olaf, Thanks Mark.