© 2024 DRIVEN LIFESTYLE. All rights reserved.
This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.
I don't know, could you check if your drainage holes at the bottom are free? Many find that they had been completely filled with sealer at the...
Enjoying a working sunroof since 15 years of ownership, car came like that ;-)
I have been searching the 308 threads for that, but other than moving US spec to Euro spec, did not find it. What is meant and how to do it?...
DELPHI LL70309 works on my car TWR PNC111 for the master. The bore is slightly larger in diameter, so if you work with original dimensions on the...
just pointing to a possible misprint in the manual
Good atuff, finally got around checking it, if TDC is clutch/flywheel marker AND mark on oil filler cap...rear bank showed furthest travel around...
Hello, please note that the firing order should read 1 5 3 7 4 8 2 6 ( alternating between banks), does currently say 1 3 5 ... cheers braq
I should think so too
I would appreciate a bit more on removing the blue sensor cap. After inserting a screwdriver in the gap and prying it up (with another underneath)...
Depending on your luck getting the pin through can take a long time. Shortcut : You can line them up with a 8mm drill bit from below, lower it so...
I am not on site, but can get a can of pretty much any paint (code).... So we kind of agree that is is most likely blue sera metalic? cheers Braq
my guess is blue sera metalic, what's yours?
Full by braq posted Jun 9, 2022 at 8:57 PM I am not at home, but about to order some touch up paint, would you know what this paint code or name...
Price list started with the 308 GTB, then 308 GTS, then Mondial, then 400/412, Boxer (if so)/Testarossa....
The spring in the tensioner provides the force, watching (and torquing down) where this force is able to move the belt furthest "inward" would...
Love it, so anyone with frequencies and engine? The link includes the same call for a database would be helpful mine stands as 1983 QV engine...
Hi Steve, thank you for the request on clarification...I mean with the tensioner bearing bolt still loose going around 2 turns of the crankshaft...
Hello all, I'd appreciate your input on the following: Changed the belt on a QV and went for the Ferrari method, torqueing the tensioner (Hill)...
Hi Gunn, thanks for the info on your setup. My consideration was in regards to positioning it as balanced as possible, I am not going to drop the...
Hi everybody....what seem like an easy enough job leaves me with questions. Full by braq posted Jun 9, 2022 at 8:57 PM Starting with the axles...
