© 2024 DRIVEN LIFESTYLE. All rights reserved.
This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.
I have seen this more than once. Pap 348 is right. Just drive it, it should be good to go.
I use a long dial indicator the screws into the spark plug hole. I then rotate to zero movement and rotate further until the dial indicator reads...
Confirm the fuel pump is actually running and making pressure.
Did you disable driver signature enforcement? You must do this to have the usb work on SDX. I have not had any issues with my cable. I can see...
I have a 458 in the shop that has experienced a hard brake pedal but it happened right after startup as the car was being moved at very low...
It has a plug in wireless option that is terrible and rarely works well. I tried for some time to get to work well and it was just too much...
I back the 458/488 on the lift and when the doors open and are about an inch from the lift upright left and right, that is the spot. I have used...
The spark plugs don't look too bad. With a lot of idling, all spark plugs are black. You don't want them to be wet and your plugs are not wet. You...
I was involved in an investigation with a 430 and there was no available crash data on that car. I know 458/488 is more sophisticated and there...
Jarrod, I am always busy and have a number of big projects but I work in smaller tuning and maintenance jobs as they come through. Give us a call...
Having worked on many of these cars, I will say it is difficult to pin point one thing. You really need to find a shop that is VERY familiar with...
And the yearly license fee to stay up to date is not insignificant.
I think the long service program from the factory has contributed to the lack of interest in servicing these models. The owners have been getting...
I have used the original tool but haven't made one. I would also make one but I don't have the plugs. Shouldn't be that difficult.
I am sure I will be corrected if I am incorrect but the Pico diagnostic results are from resistance in cranking analysis. Unlike an actual...
I have spoken to Sam several times. He returns my text or call rather quickly. As well, Trev has responded to WhatsApp text and calls. To be fair...
I agree with yelcab, If they are soft and pliable, I don't see why they would not do the job.
What part of the hardware do you need and how many?
I have used the valves but not the cams. Very good parts. Had zero issues. As for the cam. If the specs meet what your engine needs for the...
Make sure you watch for the shims (washers) that will be on the studs at the very front of the panel. You will want them back in the same position.