© 2024 DRIVEN LIFESTYLE. All rights reserved.
This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.
The oil cooler does have a thermostat, but it not a very good one. There is a small bypass that allows a bit of flow and that, coupled with some...
I am having a hard time with the physics as described here. The flow from the water pump is to the top of the radiator and the bottom of the...
A 348 is a really cool car, but with the engine out service I am not sure it's simpler. Am thinking a 60s car like a Mustang to mess around with...
I appreciate the kind words, yes that's my car on Bring a Trailer. It's time for me to move on to something else. I like cars and tinkering, so...
Yes - that's my car. There were a few tire kickers, but no one serious. Given that it needed a major, I decided to to get that out of the way...
What do you consider high mileage? It may have value at the right price, do they have a reserve on it?
Better to have them cleaned as a first pass. Mr Injector does this and it is inexpensive. When they are done, you will get a report detailing...
Good call on not driving the car, ask me how I know... I have a spare if you need it, PM me
You should not have to touch the fence. Break the nut loose, then rotate the bolt/nut combination as if to adjust the a-arm position during an...
Makes sense, I may give it a tap or two first. Not really happy with how much thread locker was used in that area, do you find that on...
Thanks - been looking at it warily over the past few weeks as I really don't want to damage it...
I am in the midst of taking off the front cover on my 456 and it appears a lot of thread-locking compound was used on the bolt holding the oil...
Agree on the tuning. Given that this is a positive displacement pump at high pressure, they are probably trying to limit the pulsations as...
John, That line has a similar crimp in the middle, so i am guessing an orifice as well. Did you have one made up with an orifice? I would not...
Do you know if the suspension line has an orifice in it too? It is interesting that there are oodles of pump-to-steering rack lines on...
Does anyone have any information on these pumps? I am experiencing a leak on the driver's side of the car near the pump. It may be a line, but I...
Sorry if this has been asked already, what is the brand of the sealant you use in conjunction with the gaskets such as the front cover? Thanks
Anyone have a picture of the fuse panel for a 456GT? I am interested in the area on the driver's side of the panel as installed where the...
If you were going to do a kit, you wouldn't use all the factory stuff under the hood - it's expensive for really no reason... I am not sure i...
Do you have a part number for the McMaster version?