© 2024 DRIVEN LIFESTYLE. All rights reserved.
This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.
If anyone out there has converted any Ferrari (or any other car) from K-Jetronic to an aftermarket EFI I'd be very interested in hearing about...
no I have not used Haltech, I have used megasquirt and Holley commander on the 308 and had poor results with both,
I am trying to tune a Holley Commander 950 EFI system in a Ferrari 308 GTSi, yet all of the base maps in the Holley library seem to be geared...
my 1982 308 has 125 lbs compression is that normal or too low ?
are you still working on a Mondial EFI conversion ? I am still working on a 308 GTSi to Holley EFI conversion
I have a 1982 308 which I converted to a Pertronix 8 cyl Distributor, it puts out a tach signal that looks like a V8 now, the original Marelli...
I am going to check out Motec
I ditched the K-Jet and installed a Holley 950 commander with 24 lb injectors, and an ordinary centrifugal / vacuum advance distirbutor . It...
I made a bushing and threaded it into the CO sampling port on the header
I am converting the 308 from slow down lights to EGT gage, where are the thermocouples located in the exhaust system ? On my car they were...
Hi Folks, I am looking for 308 dyno curves for stock or slightly modified engines, any 308 model will do as long as it is identified, ie GT4,...
again, my situation is that the Ferrari is a rust bucket, was left out in the rain in Florida for an unknown number of years, and the K-Jet sat...
the hose touching that rubber cable hood (boot) is a vacuum line with a stainless steel jacket and will not generate any heat, that boot is...
If a car has one piece aluminum or steel rims inner tubes are not needed, If the car has magnesium rims and the castings exhibit excessive...
the tesla is a cool car, in whatever form you find it. if it's a 308 converted to a tesla powertrain, thats fine, engineers like to build...
This is a forum for discussion, the interchange of observations and ideas in a friendly setting. I do not wish to disparage the engineers or...
well we will see how it drives.
so to continue this mystery, my question is, is there a heater hose that runs from the drivers side of the engine thru the car to the front ?...
I have a 1982 GTSi and there seems to be a 1" coolant fitting on the engine just to the right of the flywheel access cover and it seems to be in...
yes its a us model ,1982 GTSi, thanks for posting the photo, now its all clear to me now. My flywheel has a glob of white paint covering...
