© 2024 DRIVEN LIFESTYLE. All rights reserved.
This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.
I checked. You have the updated version of the ribbon. Your motor covers should be zinc plated not painted. Don't worry about the broken...
When you remove the crossover of a TR exhaust it will sound like two raw six cylinders rather than one unique 12. The stock muffler does have a...
Unfortunately that is broken. The tabs are fragile and it is a weak design. You'll need to build a support when you install it. I will check...
Unfortunately I can't pull a number off of them. I did get them off a late '80's Alfa Spider (US Spec). What exactly did you need?
I use a narrow block of wood that fits inside the lift point channels. Does your car have these?
Sold!
I am certain that is Kerrytwig's old car.
It is a great location for the show. I am happy to read this news.
Hi Dom, Fortunately I did make another run. I also made another run of the high voltage decals too. I have another thread but need to...
I will try Mobil 1 for my next transmission fill. I like their engine oil and the idea of locally sourcing Mobil 1 products too. I had Redline...
My first run of Radiator decals sold out. Here is the previous thread for reference:...
Where in LA are you?
It isn't a hack job to keep it simple. Fortunately your boot is good. I would urge you to cut the old clamp off and slip the boot back on. You...
Is the current boot torn? I wouldn't touch the shaft if the current boot is fine.
Those look like Kinesis K28 wheels: https://www.kinesismotorsport.com/collection
Guido's 512TR boards are plug and play. The Testarossa boards need the larger terminals.
My original plan was to modify the internals of a spare stock muffler (with a x pipe instead of the factory chamber) and have the pre cats...
I ran these with the main catalytic converters in place and the stock muffler. I passed California smog with this setup. When I installed...
With the fuel cell in the front it needs the engine shifted forward with a transaxle. It might be enough room to get the axles behind the engine.
That was fun to look at. Thanks for finding it.