© 2024 DRIVEN LIFESTYLE. All rights reserved.
This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.
No F40/Sport seats? That's the best part of the 348 SS.
Progress! All other fittings/lines are on their way. [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH]
I am recreating the fuel lines with -6 AN hoses. I'm using E85 compatible hose so it should be perfectly able to handle the ethanol content in...
I mentioned in my original post that it was the pressure line from the filter to the distribution block. There were/are no signs of chafing,...
I was way too close to losing my F355 Friday night. I backed it out of the garage and shut it off so I could close the garage and grab my...
In for this info as well. I have a TR that has improperly functioning limit switches. I need to remove the A/B pillar covers to see what can be...
Just rechecked with engine off, could only get 1121. Started engine, 4 quick flashes on each light (1-6 and 7-12). At this point its hard to...
Good to know. Thank you.
OK thank you.
Yeah I've seen that info as well but good to know its somewhat common knowledge. I'll pull the codes again and see what they are but I only had...
The codes are in fact 1121 and not 1211.
So simply use two of the above in the 512 housing?
Ok, good to know, thank you.
They will fit in the same spot designed for the single 512 sensor?
Of course it has to be the $1000 sensor.....
So the 130975 would be the cause for the 1211 VS the 146233? 146233 phase sensor...
Connector for the RPM sensor or? Thank you, I'll double check all the connectors in the harness, those that are within reach of course.
Hhhhmmm, interesting. The CELs do come on while idling and they go out once moving. The lights are bothersome but the main issue I'm trying to...
I was thinking 1211 referred to the single sensor on the RR upper head (right side intake cam) but 1211 may refer to the individual crank angle...
Hello, I am working on a 1992 512 TR with 15,000 miles and while the car runs just about perfectly there is an issue with CELs from both banks....