© 2024 DRIVEN LIFESTYLE. All rights reserved.
This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.
I have had no trouble with the superformance valves in my QV.
Run a length of baling wire through the "tunnel" from the front to the rear of the car. Attach the wire to the new hose and patiently pull/push...
This will have to be a labor of love as it will cost more to restore it than to find one in reasonably good condition. The argument I usually...
I still have the mast but will be out of town for a week. Feel free to contact me for further details. Richard C
I still have the head gaskets. The pistons and washer bottle are long gone. Richard C
I have a few things left. What are you looking for? RC
Waymar I sent the liners without the block and one piston to Millennium. My bill from (in 2020) was $2218.00 for overbore and new nicosil....
I used Millennium to overbore (.5) and re-plate the nicosil. It has worked nicely.
Full set of original Koni's and springs from an 83, Euro, QV. $300.00 [ATTACH]
308 QV Steering Rack Undamaged steering rack from euro, 83, QV. Has new boots, new end bushing and superformance quick rack conversion....
I used Millennium Technologies to overbore and put new nikkosil on my original liners. There have been no problem whatsoever.
Prime the pump via the oil cooler hose. Just use a pump oiler and fill it up..
Here are some more shots of K & W from last weekend. This is all I could load. I will try again tomorrow. Richard C [ATTACH] [ATTACH] [ATTACH]...
I am bringing my recently restored European, 308 QV. Look forward to seeing you!
Wonder if the needle simply slipped.
Try a hot start with the throttle open. It could be flooded from the injectors leaking
Thanks, I purchased a new set of JE pistons about a year and 1/2 ago. Richard
I installed a set on a QV last year. No issues whatsoever.
These headers are from an 83, 308 QV. They were modified, presumably to meet US specs. The flanges and downpipes are in good condition. From...
I worked on the suspension, not the body. If I remember correctly, I had to replace a lower control arm on the right side (I think). The motor...