© 2024 DRIVEN LIFESTYLE. All rights reserved.
This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.
Yes, that's the way I have it... That metal spacer on the rod seems to be taking up 20mm but its fixed on a collar.... Could it be off another...
I was told it was the spare wheel holder for a 86 328, but its a bit short at 10cm threaded bar including the metal collar.. any ideas which...
15 years... [ATTACH]
Hi all... I've recently finished the refurb on my rear suspension (with lots of help from FChat)...... Next job is the front suspension. Has...
Nearly there... engine back in and just now need to add fluids and get it started..... hence I have refurbished the a/c system at the same time!...
Thanks for sharing... really good bit of information.... My system is now all back together, just need to add the oil and get the system charged...
Yes fully flushed all pipes, condenser also fully flushed... fitting new dryer, expansion valve and O rings... Will add 135cc and see how it...
It could of been empty yes?
ok Thanks for the information..... I was still on the original R12 system that has never worked.. (owned the car for 16 yrs)!! I've removed the...
Great thanks for this, mine also is now empty as I have flushed the system and replaced a few parts... Did you top yours up from the compressor...
Can anyone confirm the amount of oil required in my A/C system? it has the Sandon 507 compressor fitted.. Thanks in advance..
All done.. thanks for every ones help...:):) [ATTACH]
For a bolt its nice:):) and some times you have to bite the bullet and pay for the correct item...
One new from Superperformance delivered today! Just need some warmth in the garage now and I can hopefully fit it today... [ATTACH]
Thats really nice.... I've ordered the superperformance bolt.... The horse would be nice but its not critical to me.:)
Simon, yes they were re-plated....not cheapest bolt either at £24 each So there is no load on the top outer? Is it just the inners that need...
I've just rebuilt the rear suspension on my 328..... I torqued all the bolts as instructed about a week ago.. any way noticed a bolt head on the...
I've just completed the rear suspension.... if you have the tools to remove and fit the new bushings just get a local garage to tack the bushes......
Compression end?
I didn't want to break/damage any thing... With the circlip removed should the whole injector lift out?