© 2024 DRIVEN LIFESTYLE. All rights reserved.
This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.
I would certainly say black is the way to go Graham with it being such a rare colour over here in Blighty! I spoke with that other guy who had...
Jim, it has taken Alistair over a year to place his first post! Pictures may be forthcoming sometime in the following millenia! I will try to get...
Hi all, this car is very close to the one I am restoring at present, 06996. It was originally the same colour, same trim colour and also had the...
Graham, I know a man who has a set for sale! Give me a ring and I will pass the number on, Alasdair
Hi, both the cars here (01500 and 06996) have stainless trim on them, Al Cowan
Hi all, just to say that my friend has just had his block bored for his 308 GT4, he went for the 82mm high comp pistons. The engineering shop we...
Hi graham, we have costed it out to just under market value, I am far too cheap I think! It should be more desirable with the Campags and arches,...
Hi all, cut the rest of the wings off yesterday and took 2 hours to wrestle the front bulkhead fibreglass section out. What a pain to remove....
I have started to remove the panels of the car to get in to repair some of the damage before it gets dipped. I removed the panel behind the...
This one! [ATTACH]
Hi Graham, if you take them to a local paintshop, they should be able to colour match it pretty accurately, I think they are more red than orange...
Hi Graham, the one right behind the drivers head on a GT that the rear window sits onto, will get a pic of it, Alasdair
Hi all, i drilled all the spot welds today and removed the panel behind the drivers and passengers head. The fuel breather vent hose runs under...
I took the ones off "the heap" today, easy job to do with a 3 foot bar and 1/2 inch drive allen key! They all cracked fine! Even easier when the...
Hi, I am in the UK but send my pumps to this guy, he is excellent. I had a Lamborghini Diablo pump done by him WITH new bearing, shafts and seals...
Seems to be rotting in the usual places just like the one I am doing! Front wings, around the rear window, bottom of doors, etc! Would certainly...
Hi, I bridged the wires together and the fans came on rather noisily! Will require a bit of fettling in t he spring. I will remove the switch to...
Graham, boiling hot water usually is good for getting the rubber round the form, also a hot air gun can work quite well too. Just don't set fire...
Hi Graham, I don't know yet, I have to sit down this weekend and try and price the job for the guy to see if it is economical for me to do it,...
What did the original tool kit spanners have written on the side, there is a rusty set down the side of the boot! The car is certainly a...
