© 2024 DRIVEN LIFESTYLE. All rights reserved.
This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.
Thanks again to all those who have contributed to this topic. I have actually solved the problem of leakage, although committing two sins....
Thanks for all your answers. The brand of the gasket is ELRING. According to Maranello Classic Parts and Eurospares, this is the OEM Product. It's...
Due to a leaking exhaust valve of my 400i VIN48739, I had the left bank cylinder head overhauled in a specialised engine shop. while the engine...
The situation remains unchanged, in the sense that the technical solution is available but the demand for the minimum quantity required to get it...
Even after detecting and eliminating all flaws in the ignition system and in the injection system, the hot-start problem reoccurred and developed...
Yes, this is the picture for the 400i. However the one that's still available for the r.h. side is the 412 design with "the big dimple in the...
when solving starting problems on my 400i (see my thread referring to this issue) i wished to replace the conveyors from the k-jetronic airflow...
A detailed investigation of the suction system revealed a number of leaking connections and/or hoses including the conveyors on the airflow...
The coil is actually the original Marelli with three terminals. The Swiss version of the engine does have two sensors in the distributor for...
thanks for all the comments! May be i have to clarify that the engine is running smoothly and the emissions are well within the legal range for...
The system has indeed two pressure accumulators and two pressure regulating valves. I can exclude the pressure regulating valves because once...
First time it happened 2 years ago: after the car was parked for about 2 hours following a longer drive, the engine did not start as usual. Only...
The cold engine starts without any problems and has so far never given trouble while driving. However when switched off, after a drive (hot...
Hi Rick, At least for the 400i (1983) the front and rear calipers with 4 pistons each are standard (see attachment) Kind regards Peter...
Good morning, The solution for the front calipers was the following repair set from ATE: 2M4-42, part No.95691531. I got it from a friend who...
Thank you Nicofr. In the meantime i got detailed information from my Ferrari dealer. Fortunately, it was necessary only to remove the inner part...
I'm about to remove the door panel of my 599GTB. After removing all related screws and bolts (under armrest/door opener and at the lower end of...
i have bought all the necessary items for the annual service at my "new" 599GTB. Now, i can not locate the position of the air filter for the AC...
I just signed a contract for a 2007 599 GTB. Before going on a test drive, I have asked about the Launch Control system and was informed that by...
Hi 166&456, it is correct that the ECU controlled movement is faster than the switch operated movement. As your equivalent problem was solved...