© 2024 DRIVEN LIFESTYLE. All rights reserved.
This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.
Ground the wires going to the sensors and see if something in the dash lights up. Ivan
As I said earlier, the owner's manual specifies ATF ... which is Type F. I agree with you not to go fancy trying a modern synthetic and I have no...
It uses type "ATF". It does not need to be AGIP. Ivan
More photos of the car while I owned it: https://thecarnut.com/khamsin75black/ Interesting that it has a Euro steering wheel being a USA car. Ivan
I would not call them mistakes. The only thing I found "wrong" was one of the cam oil line banjo bolts, which had the wrong hole size. It is...
The engine is alive! Having learned from a prior experience, I placed a large wet towel on the front fender in front of the carb trumpets in case...
Engine is now back together. Gas tank was paint and installed. I am about ready to fire this thing up and hopefully all will be ok. Fingers...
True, not something you want to discover when working on an engine. I am actually surprised to have noticed the different size of the holes. The...
That is exactly what Gene O'Gorman was kind enough to do and it turns out both hoses have the bolts with the small holes on the top and the big...
The plot thickens. The upper and lower oil bolts have the same part number but a different description in the parts manual. If you look at items...
Ran into an issue when installing the two external oil lines to the head. The two two bolts are different and according to the parts manual they...
Geometrically it looked identical, just extremely tight. Ivan
The car barely lowers when you push down. I noticed after reinstalling the upper and lower balls joints that it was very difficult to manually...
I just finished installing some new front end components and now the car sits very high and the steering is extremely hard. I did not remove the...
The Miura was probably his greatest achievement, followed by the Countach. May he rest in peace. Ivan
While the head was being worked on the suspension got some attention. Rear brakes were done. Differential oil changed, differential pinion seal...
The cylinder head is back from the shop. All the combustion chambers were measured and two found to be a bit smaller than the reset. They are now...
It has no reserve. Ivan
I have an Optima red top Group 35 in my Khamsin. Ivan
Thanks Gene! Do you know the proper combustion chamber volume for a standard 3500GT engine? Ivan
