© 2024 DRIVEN LIFESTYLE. All rights reserved.
This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.
Those aren't the highest tensile bolts. I now use better ones and would torque those to 60 Nm. And more importantly use Loctite. So just take a...
https://m.youtube.com/watch?v=AzIurb_7Q5I Suppose this was a little naughty then!
Cheers and I'll send back a dual mass O ring in case you need to regrease any time.
Oil soaks in very quickly and easily and stays there. It slips and causes the heat marks mentioned which is then a cycle of wear and damage. for...
When done can I have a set please!
The original dish on flywheel is negligible and was for ease of take up. A dish of those measurements will wear the friction plates unevenly....
a good preventative measure is replacing all the hoses with silicon at engine out. some are not very easily reachable.
The thicknesses i have are Intermediate plate thickness 9.00 Friction plate Thickness at rest 7.25 Thickness under load 6.90 Wear limit...
Those friction plates are totally shot. What thickness have you left? I can't see any grooves in the pic at all. You have set up height in the...
I used one recommended on here and sold on ebay. It needed a bit of sorting to form a gas tight fit but not a major job and so much cheaper. I'll...
All the above, but i also had once a dodgy connection to one of the main ecu.
Great service from Capt Z. Just let down by how long it took to get mine through us customs and into post system there. and also time taken to get...
sorry having a moment there. was talking 355 not 348 and key fob not keys so feel free to ignore me completely!
2 black one red i thought was standard.
and then there is 3 minutes into this video from Sy https://www.youtube.com/watch?v=T9GEm_0EzZ4&index=44&list=PLdojm297PQ7N8B6JfW5UP2kCBKhcOjREs
What he said!!!
it looks like above the gear selector input, which is way back from most water pipes. could be from gearbox oil cooler in vee?
what is it, water?
no havent balanced it yet, needs a few more tweaks to design first. That is a standard 355 on there, but beauty of it is you can put anything...
Test unit just back from shop. Just going off to test this little beauty and see how much springing i need to put into a friction plate. [ATTACH]...